Hakutulokset
Hakutulokset
Haulla "264" löytyi 151 tulosta.
IEC 62264-5:2011 is based on the use of IEC 62264 abstract models previously defined in IEC 62264-1 and IEC 62264-2 combined with verbs to define a transaction model for information exchange. It is recognized that other non-IEC 62264-5 transaction protocols are possible and are not deemed invalid ...
https://sales.sfs.fi/julkaisu.html.stx?id=449818
IEC 62264-1:2013 describes the manufacturing operations management domain (Level 3) and its activities, and the interface content and associated transactions within Level 3 and between Level 3 and Level 4. This description enables integration between the manufacturing operations and control domai ...
https://sales.sfs.fi/julkaisu.html.stx?id=336664
https://sales.sfs.fi/julkaisu.html.stx?id=997986
https://sales.sfs.fi/julkaisu.html.stx?id=997939
https://sales.sfs.fi/julkaisu.html.stx?id=997933
ISO 26424:2008 specifies a method for measuring the abrasive wear rate of ceramic coatings by means of a micro-scale abrasion wear test based on the well-known crater-grinding technique used for coating thickness determination in ISO 26423.
The method can provide data on both coating and substrat ...
https://sales.sfs.fi/julkaisu.html.stx?id=409949
https://sales.sfs.fi/julkaisu.html.stx?id=997936
ISO 5264-2:2011 specifies a method for the laboratory beating of pulp using a PFI mill. The description is limited to the sampling, preparation and beating of the pulp and the beating equipment.
In principle, this method is applicable to all kinds of chemical and semi-chemical pulps. In practice, ...
https://sales.sfs.fi/julkaisu.html.stx?id=193505
ISO 26423:2009 specifies a method for the determination of the thickness of ceramic coatings by a crater grinding method, which includes the grinding of a spherical cavity and subsequent microscopic examination of the crater.
Because of the uncertainty introduced into the measurement of crater d ...
https://sales.sfs.fi/julkaisu.html.stx?id=409950
ISO 13264:2010 specifies a method for testing the mechanical strength or flexibility of a fabricated thermoplastic fitting intended to be used in non-pressure underground applications.
The standards writing body responsible for this document in Finland is Finnish Plastics Industries Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=584062
SFS-EN 62264-5:2016:en – Enterprise-control system integration – Part 5: Business to manufacturing transactions
Verkkokaupan tuotteet
SFS-EN 62264-1:en – Enterprise-control system integration – Part 1: Models and terminology
Verkkokaupan tuotteet
SFS-EN 1264-2:2021:en – Water based surface embedded heating and cooling systems. Part 2: Floor heating: Methods for the determination of the thermal output using calculations and experimental tests
Verkkokaupan tuotteet
SFS-EN 1264-5:2021:en – Water based surface embedded heating and cooling systems. Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
Verkkokaupan tuotteet
SFS-EN 1264-3:2021:en – Water based surface embedded heating and cooling systems. Part 3: Dimensioning
Verkkokaupan tuotteet
SFS-EN ISO 26424:en – Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
Verkkokaupan tuotteet
SFS-EN 1264-4:2021:en – Water based surface embedded heating and cooling systems. Part 4: Installation
Verkkokaupan tuotteet
SFS-EN ISO 5264-2:en – Pulps. Laboratory beating. Part 2: PFI mill method (ISO 5264-2:2011)
Verkkokaupan tuotteet
SFS-EN ISO 26423:en – Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method (ISO 26423:2009)
Verkkokaupan tuotteet
SFS-EN ISO 13264:2017:en – Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
Verkkokaupan tuotteet