Hakutulokset
Hakutulokset
Haulla "102" löytyi 713 tulosta.
This part of EN 10226 specifies a process using limit gauges, for the validation of taper internal and external threads and parallel internal threads on piping systems components and other products, the dimensions and tolerances of which are detailed in EN 10226-1 and prEN 10226-2.
The gauging sy ...
https://sales.sfs.fi/julkaisu.html.stx?id=3556
ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256-1, ISO 10256-2 and ISO 10256-3.
Performance requirements are established, where appropriate for the following:
a) materials, ...
https://sales.sfs.fi/julkaisu.html.stx?id=668056
ISO 10256-1:2016 is part of ISO 10256 specifies general requirements for head, face, neck and body protectors (hereafter referred to as protectors) for use in ice hockey.
ISO 10256-1:2016 is intended only for protectors used for ice hockey. Requirements are given for the following:
a) terms and d ...
https://sales.sfs.fi/julkaisu.html.stx?id=455217
ISO 10218-2:2011 specifies safety requirements for the integration of industrial robots and industrial robot systems as defined in ISO 10218-1, and industrial robot cell(s). The integration includes the following:
the design, manufacturing, installation, operation, maintenance and decommissioning ...
https://sales.sfs.fi/julkaisu.html.stx?id=172144
ISO 10218-1:2011 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these ha ...
https://sales.sfs.fi/julkaisu.html.stx?id=172143
ISO/IEEE 11073-10102:2014 extends the IEEE 11073-10101 Nomenclature by providing support for ECG annotation terminology. It may be used either in conjunction with other IEEE 11073 standards (e.g. ISO/IEEE 11073-10201:2001) or independently with other standards. The major subject areas addressed b ...
https://sales.sfs.fi/julkaisu.html.stx?id=247493
ISO 10256-2:2016 specifies performance requirements and test methods for head protectors for use in ice hockey and is intended to be read in conjunction with ISO 10256-1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) construction and protected ...
https://sales.sfs.fi/julkaisu.html.stx?id=668078
ISO 10211:2017 sets out the specifications for a three-dimensional and a two-dimensional geometrical model of a thermal bridge for the numerical calculation of
- heat flows, in order to assess the overall heat loss from a building or part of it, and
- minimum surface temperatures, in order to ass ...
https://sales.sfs.fi/julkaisu.html.stx?id=527202
This standard defines the performance and dimensions of optical physical contact for EN 4641-102 cable specification.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=917278
ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256-1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) constru ...
https://sales.sfs.fi/julkaisu.html.stx?id=668059
SFS-EN 10226-3:en – Pipes threads where pressure tight joint are made on the threads. Part 3: Verification by means of limit gauges
Verkkokaupan tuotteet
SFS-EN ISO 10256-4:2018:en – Jääkiekkoilijoiden suojaimet. Osa 4: Maalivahdin pään- ja kasvojensuojaimet
Verkkokaupan tuotteet
SFS-EN ISO 10256-1:2016:en – Jääkiekkoilijoiden suojaimet. Osa 1: Yleiset vaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 10218-2:en – Robotit ja robotiikkalaitteet. Turvallisuusvaatimukset. Osa 2: Robottijärjestelmät ja niiden yhdistelmät
Verkkokaupan tuotteet
SFS-EN ISO 10218-1:en – Robotit ja robotiikkalaitteet. Turvallisuusvaatimukset. Osa 1: Teollisuusrobotit
Verkkokaupan tuotteet
SFS-EN ISO 11073-10102:en – Health informatics. Point-of-care medical device communication. Part 10102: Nomenclature. Annotated ECG (ISO/IEEE 11073-10102:2014)
Verkkokaupan tuotteet
SFS-EN ISO 10256-2:2018:en – Jääkiekkoilijoiden suojaimet. Osa 2: Päänsuojaimet
Verkkokaupan tuotteet
SFS-EN ISO 10211:2017:en – Rakennusten kylmäsillat. Lämpövirrat ja pintalämpötilat. Yksityiskohtaiset laskemat
Verkkokaupan tuotteet
SFS-EN 4639-102 – Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Part 102: Optical contact for cable EN 4641-102. Operating temperatures between. 55 °C and 100 °C. Product standard
Verkkokaupan tuotteet
SFS-EN ISO 10256-3:2018:en – Jääkiekkoilijoiden suojaimet. Osa 3: Kasvosuojaimet
Verkkokaupan tuotteet