Hakutulokset
Hakutulokset
Haulla "255" löytyi 140 tulosta.
ISO 25539-3:2011 specifies requirements for vena cava filters, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging and information supplied by the manu ...
https://sales.sfs.fi/julkaisu.html.stx?id=183433
ISO 25539-1:2017 specifies requirements for the evaluation of endovascular systems (prostheses and delivery systems) and requirements with respect to nomenclature, design attributes and information supplied by the manufacturer based upon current medical knowledge. Guidance for the development of ...
https://sales.sfs.fi/julkaisu.html.stx?id=479784
This document specifies requirements for the evaluation of stent systems (vascular stents and delivery systems) and requirements with respect to nomenclature, design attributes and information supplied by the manufacturer, based upon current medical knowledge. Guidance for the development of in v ...
https://sales.sfs.fi/julkaisu.html.stx?id=932178
ISO 13255:2010 specifies a method for testing the airtightness of joints of thermoplastics piping systems for soil and waste discharge inside buildings.
The standards writing body responsible for this document in Finland is Finnish Plastics Industries Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=569888
https://sales.sfs.fi/julkaisu.html.stx?id=1032616
Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of known initial volume has the air pumped out until the pressure is practically zero. The quantity of gas whi ...
https://sales.sfs.fi/julkaisu.html.stx?id=13349
This document specifies a method of determining apparent viscosity of resins in a liquid state using a single cylinder type rotational viscometer.
The method can be used for viscosity measurements in the range from 0,02 Pa · s to 60 000 Pa · s.
This document is applicable to both Newtonian and ...
https://sales.sfs.fi/julkaisu.html.stx?id=679280
This lnternational Standard specifies a method for determining the hydroxyl value of unsaturated polyester resins.
ln fact, this method determines the difference between the hydroxyl value and the acid value; it is therefore necessary to determine the total acid value separately, in order to calc ...
https://sales.sfs.fi/julkaisu.html.stx?id=13347
This document defines the rules to be applied for symbolic representation of welded joints on technical drawings. This can include information about the geometry, manufacture, quality and testing of the welds. The principles of this document can also be applied to soldered and brazed joints.
It i ...
https://sales.sfs.fi/julkaisu.html.stx?id=762605
IEC 60255-27:2013 describes the product safety requirements for measuring relays and protection equipment having a rated a.c. voltage up to 1 000 V with a rated frequency up to 65 Hz, or a rated d.c. voltage up to 1 500 V. Above these limits, IEC 60664-1 is applicable for the determination of cle ...
https://sales.sfs.fi/julkaisu.html.stx?id=342258
SFS-EN ISO 25539-3:en – Sydän- ja verisuoni-implantit. Suonensisäiset laitteet. Osa 3: Onttolaskimosuodattimet
Verkkokaupan tuotteet
SFS-EN ISO 25539-1:2017:en – Sydän- ja verisuoni-implantit. Suonensisäiset laitteet. Osa 1: Suonensisäiset proteesit
Verkkokaupan tuotteet
SFS-EN ISO 25539-2:2020:en – Cardiovascular implants. Endovascular devices. Part 2: Vascular stents (ISO 25539-2:2020)
Verkkokaupan tuotteet
SFS-EN ISO 13255:2017:en – Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints (ISO 13255:2010)
Verkkokaupan tuotteet
SFS-EN IEC 60255-187-1:2021:en – Measuring relays and protection equipment – Part 187-1: Functional requirements for differential protection – Restrained and unrestrained differential protection of motors, generators and transformers
Verkkokaupan tuotteet
SFS-EN ISO 2556:en – Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method (ISO 2556:1974)
Verkkokaupan tuotteet
SFS-EN ISO 2555:2018:en – Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
Verkkokaupan tuotteet
SFS-EN ISO 2554:en – Plastics. Unsaturated polyester resins. Determination of hydroxyl value (ISO 2554:1997)
Verkkokaupan tuotteet
SFS-EN ISO 2553:2019:en – Hitsaus ja sen lähiprosessit. Piirustusmerkinnät. Hitsausliitokset
Verkkokaupan tuotteet
SFS-EN 60255-27:en – Measuring relays and protection equipment – Part 27: Product safety requirements
Verkkokaupan tuotteet