Hakutulokset
Hakutulokset
Haulla "405" löytyi 221 tulosta.
ISO 14405-3:2016 establishes the default specification operator for angular size and defines a number of special specification operators for features of angular size: cone (truncated, i.e. frustum, or not), wedge (truncated or not), two opposite straight lines (intersection of a wedge/truncated w ...
https://sales.sfs.fi/julkaisu.html.stx?id=464213
This standard specifies the procedure to determine the compass safe distance of cable ties with metallic lock-ing devices.
It shall be used together with EN 4057-100.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=885541
ISO 14405-1:2016 establishes the default specification operator (see ISO 17450-2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder", "sphere", "torus,"[1], "circle", "two parallel opposite planes", or "two parallel opposi ...
https://sales.sfs.fi/julkaisu.html.stx?id=425499
This document illustrates the ambiguity caused by the use of dimensional specifications to control properties other than linear or angular size and the benefit of using geometrical specifications instead.
Dimensional tolerancing can be indicated by ± tolerancing or geometrical specifications.
Th ...
https://sales.sfs.fi/julkaisu.html.stx?id=739625
IEC 60811-405:2012 specifies the procedure for the thermal stability test which applies to PVC compounds. IEC 60811-405:2012 cancels and replaces Clause 9 of IEC 60811-3-2:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific ...
https://sales.sfs.fi/julkaisu.html.stx?id=335301
1 Soveltamisala
Standardin ISO 14405 tässä osassa esitellään pituusmitan oletusspesifikaatio-operaattori (ks. ISO 174502) ja määritellään joukko pituusmittojen erikoisspesifikaatio-operaattoreita, joita käytetään mitallisille elementeille tyypiltään esim. ”lieriö”, ”pallo”, ...
https://sales.sfs.fi/julkaisu.html.stx?id=475950
Gives the requirements for three types of E-type glass sleeving using either braided or knitted construction with a continuous acrylic based coating, and differentiated by their breakdown voltage: high breakdown voltage (sheet 403), medium breakdown voltage (sheet 404) and low breakdown voltage ( ...
https://sales.sfs.fi/julkaisu.html.stx?id=374973
This International Standard describes the procedures for assessing the overall change in appearance of textile floor coverings caused by Vettermann drum and hexapod tumbler testers according to ISO 10361 and ISO 4918
The standards writing body responsible for this document in Finland is Finnish ...
https://sales.sfs.fi/julkaisu.html.stx?id=515749
This document specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
This document does not cover testing of materials and devices that do not come into ...
https://sales.sfs.fi/julkaisu.html.stx?id=724425
This document specifies a laboratory method for the determination of the distillation characteristics of light and middle distillates derived from petroleum and related products of synthetic or biological origin with initial boiling points above 0 °C and end-points below approximately 400 °C, u ...
https://sales.sfs.fi/julkaisu.html.stx?id=766224
SFS-EN ISO 14405-3:2017:en – Geometrical product specifications (GPS). Dimensional tolerancing. Part 3: Angular sizes (ISO 14405-3:2016)
Verkkokaupan tuotteet
SFS-EN 4057-405 – Aerospace series. Cable ties for harnesses. Test methods. Part 405: Compass safe distance
Verkkokaupan tuotteet
SFS-EN ISO 14405-1:2016:en – Geometrinen tuotemäärittely (GPS). Mittatolerointi. Osa 1: Pituusmitat
Verkkokaupan tuotteet
SFS-EN ISO 14405-2:2019:en – Geometrical product specifications (GPS). Dimensional tolerancing. Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
Verkkokaupan tuotteet
SFS-EN 60811-405:en – Electric and optical fibre cables – Test methods for non-metallic materials – Part 405: Miscellaneous tests – Thermal stability test for PVC insulations and PVC sheaths
Verkkokaupan tuotteet
SFS-EN ISO 14405-1:2016 – Geometrinen tuotemäärittely (GPS). Mittatolerointi. Osa 1: Pituusmitat
Verkkokaupan tuotteet
SFS-EN 60684-3-403 to 405:en – Flexible insulating sleeving – Part 3: Specification for individual types of sleeving – Sheets 403 to 405: Glass textile sleeving with acrylic based coating
Verkkokaupan tuotteet
SFS-EN ISO 9405:2017:en – Textile floor coverings. Assessment of changes in appearance (ISO 9405:2015)
Verkkokaupan tuotteet
SFS-EN ISO 7405:2018:en – Hammaslääketieteessä käytettävien terveydenhuollon laitteiden ja tarvikkeiden bioyhteensopivuuden arviointi
Verkkokaupan tuotteet
SFS-EN ISO 3405:2019:en – Petroleum and related products from natural or synthetic sources. Determination of distillation characteristics at atmospheric pressure (ISO 3405:2019)
Verkkokaupan tuotteet