Hakutulokset
Hakutulokset
Haulla "583" löytyi 76 tulosta.
ISO 5832-1:2016 specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.
NOTE 1 The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this p ...
https://sales.sfs.fi/julkaisu.html.stx?id=819677
ISO 5832-2:2018 specifies the characteristics of, and corresponding test methods for, unalloyed titanium for use in the manufacture of surgical implants.
Six grades of titanium based on tensile strength are listed in Table 2.
NOTE The mechanical properties of a sample obtained from a finished pro ...
https://sales.sfs.fi/julkaisu.html.stx?id=669829
ISO 5832-7:2016 specifies the characteristics of, and corresponding test methods for, forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy for use in the manufacture of surgical implants.
The standards writing body responsible for this document in Finland is General Industry F ...
https://sales.sfs.fi/julkaisu.html.stx?id=819596
ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up t ...
https://sales.sfs.fi/julkaisu.html.stx?id=12931
ISO 14583:2011 specifies the characteristics of hexalobular socket pan head screws of product grade A and with thread sizes from M2 up to and including M10.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=166480
https://sales.sfs.fi/julkaisu.html.stx?id=100019006
https://sales.sfs.fi/julkaisu.html.stx?id=100019005
https://sales.sfs.fi/julkaisu.html.stx?id=100015032
https://sales.sfs.fi/julkaisu.html.stx?id=961939
This document applies to photovoltaic systems that are integrated into buildings with the photovoltaic modules used as construction products. It focuses on the properties of these photovoltaic systems relevant to essential building requirements as specified in the European Construction Product Re ...
https://sales.sfs.fi/julkaisu.html.stx?id=401814
SFS-EN ISO 5832-1:2019:en – Kirurgiset implantit. Metalliset materiaalit. Osa 1: Ruostumaton takoteräs
Verkkokaupan tuotteet
SFS-EN ISO 5832-2:2018:en – Kirurgiset implantit. Metalliset materiaalit. Osa 2: Puhdas titaani
Verkkokaupan tuotteet
SFS-EN ISO 5832-7:2019:en – Kirurgiset implantit. Metalliset materiaalit. Osa 7: Taottava kylmämuovattu koboltti-kromi-nikkeli-molybdeeni-rauta-seos
Verkkokaupan tuotteet
SFS-EN ISO 16583:en – Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
Verkkokaupan tuotteet
SFS-EN ISO 14583:en – Linssikantainen kuusiohammaskoloruuvi
Verkkokaupan tuotteet
SFS-EN ISO 8583-3 – Financial transaction card originated messages. Interchange message specifications. Part 3: Maintenance procedures for codes (ISO 8583-3:1998)
Verkkokaupan tuotteet
SFS-EN ISO 8583-2 – Financial transaction card originated messages. Interchange message specifications. Part 2: Application and registration procedures for Institution Identification Codes (IIC) (ISO 8583-2:1998)
Verkkokaupan tuotteet
SFS-EN 28583 – Bank card originated messages. Interchange message specifications. Content for financial transactions (ISO 8583:1987, ed. 1)
Verkkokaupan tuotteet
SFS-EN ISO 5830:2021:en – Resistance spot welding. Male electrode caps (ISO 5830:1984)
Verkkokaupan tuotteet
SFS-EN 50583-2:en – Photovoltaics in buildings – Part 2: BIPV systems
Verkkokaupan tuotteet