Hakutulokset
Hakutulokset
Haulla "1002" löytyi 395 tulosta.
This European Standard specifies tolerances on dimensions and shape for hot-rolled non-alloy and alloy steel plates with the following characteristics:
a) Nominal thickness: 3 mm < or = t < or = 400 mm;
b) Nominal width: w > or = 600 mm.
Tolerances for products of width w < 600 mm cut ...
https://sales.sfs.fi/julkaisu.html.stx?id=159040
Tämä eurooppalainen standardi määrittelee mitta- ja muototoleranssit niille kuumavalssatuille seostamattomille ja seostetuille teräslevyille, joiden
a)nimellispaksuus: 3 mm = t = 400 mm;
b)nimellisleveys: w = 600 mm.
Levystä leikattujen tuotteiden, joiden leveys w < 600 mm, toleransseist ...
https://sales.sfs.fi/julkaisu.html.stx?id=161214
This European Standard sets out a numbering system, referred to as steel numbers, for the designation of steel grades. It deals with the structure of steel numbers and the organization for their registration, allocation and dissemination. Such steel numbers are complementary to steel names set ou ...
https://sales.sfs.fi/julkaisu.html.stx?id=379882
1.1 Tässä eurooppalaisessa standardissa määritellään terästen nimikkeiden numeerinen järjestelmä, joka perustuu teräslajin merkitsemiseen numerotunnuksella. Standardissa esitetään numerotunnuksen rakenne, rekisteröinnin järjestelyt, käyttöönotto ja julkaiseminen. Numerotunnukset ...
https://sales.sfs.fi/julkaisu.html.stx?id=395403
This standard specifies the requirements relating to:
Steel FE-WM1002 (X13Cr13)
Filler metal for welding
Wire and rod
for aerospace applications.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=919281
This European Standard specifies requirements for flat products for pressure purposes made of stainless steels, including austenitic creep resisting steels, in thicknesses as indicated in Tables 7 to 10.
The requirements of EN 10028-1:2007+A1:2009 also apply.
NOTE 1 The steel grades covered by th ...
https://sales.sfs.fi/julkaisu.html.stx?id=420179
Tässä eurooppalaisessa standardissa esitetään vaatimukset painelaitteissa käytettäville taulukoiden 7…10 paksuusalueiden mukaisille ruostumattomille teräslevytuotteille, mukaan lukien austeniittiset virumislujat teräkset.
Standardin EN 10028-1 vaatimukset ovat myös voimassa.
HUOM. 1 ...
https://sales.sfs.fi/julkaisu.html.stx?id=429235
This European Standard specifies the requirements for flat products for pressure equipment made of quenched and tempered steels as specified in Table 1.
The requirements in FprEN 10028-1:2017 also apply.
NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directi ...
https://sales.sfs.fi/julkaisu.html.stx?id=528034
Tässä eurooppalaisessa standardissa esitetään vaatimukset painelaitteissa käytettäville levytuotteille, jotka valmistetaan taulukon 1 mukaisista nuorrutetuista hitsattavista hienoraeteräksistä.
Standardin EN 10028-1:2017 vaatimukset ovat myös voimassa.
HUOM. Kun EU:n virallisessa lehde ...
https://sales.sfs.fi/julkaisu.html.stx?id=542797
This European Standard specifies the requirements for flat products for pressure equipment made of thermomechanically rolled steels as specified in Table 1.
The steels are not suitable for hot forming.
NOTE 1 At the time of publication of this European Standard, no sufficient data for the standar ...
https://sales.sfs.fi/julkaisu.html.stx?id=528025
SFS-EN 10029:en – Kuumavalssatut teräslevyt, paksuus 3 mm tai yli. Mitta- ja muototoleranssit
Verkkokaupan tuotteet
SFS-EN 10029 – Kuumavalssatut teräslevyt, paksuus 3 mm tai yli. Mitta- ja muototoleranssit
Verkkokaupan tuotteet
SFS-EN 10027-2:en – Terästen nimikejärjestelmät. Osa 2: Numeerinen järjestelmä
Verkkokaupan tuotteet
SFS-EN 10027-2 – Terästen nimikejärjestelmät. Osa 2: Numeerinen järjestelmä
Verkkokaupan tuotteet
SFS-EN 4344 – Aerospace series. Steel FE-WM1002 (X13Cr13). Filler metal for welding. Wire and rod
Verkkokaupan tuotteet
SFS-EN 10028-7:2016:en – Painelaiteteräkset. Levytuotteet. Osa 7: Ruostumattomat teräkset
Verkkokaupan tuotteet
SFS-EN 10028-7:2016 – Painelaiteteräkset. Levytuotteet. Osa 7: Ruostumattomat teräkset
Verkkokaupan tuotteet
SFS-EN 10028-6:2017:en – Painelaiteteräkset. Levytuotteet. Osa 6: Nuorrutetut hitsattavat hienoraeteräkset
Verkkokaupan tuotteet
SFS-EN 10028-6:2017 – Painelaiteteräkset. Levytuotteet. Osa 6: Nuorrutetut hitsattavat hienoraeteräkset
Verkkokaupan tuotteet
SFS-EN 10028-5:2017:en – Painelaiteteräkset. Levytuotteet. Osa 5: Termomekaanisesti valssatut hitsattavat hienoraeteräkset
Verkkokaupan tuotteet