Hakutulokset

Haulla "1112" löytyi 50 tulosta.

SFS-EN ISO 11125-1:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1: Sampling (ISO 11125-1:2018)

Verkkokaupan tuotteet

This document specifies a method for the sampling of metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in other parts of ISO 11125. This is one of a number of parts of ISO 11125 ...

https://sales.sfs.fi/julkaisu.html.stx?id=716749

SFS-EN ISO 11127-1:2021:en – Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Part 1: Sampling (ISO 11127-1:2020)

Verkkokaupan tuotteet

https://sales.sfs.fi/julkaisu.html.stx?id=972637

SFS-EN ISO 11126-10:2017:en – Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 10: Almandite garnet (ISO 11126-10:2017)

Verkkokaupan tuotteet

ISO 11126-10:2017 specifies requirements for almandite garnet abrasives, as supplied for blast-cleaning. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified ...

https://sales.sfs.fi/julkaisu.html.stx?id=631339

SFS-EN ISO 11125-7:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 7: Determination of moisture (ISO 11125-7:2018)

Verkkokaupan tuotteet

This document specifies a test method for the determination of the level of free moisture present in metallic blast-cleaning abrasives. It is determined by measuring the mass lost on heating. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives ...

https://sales.sfs.fi/julkaisu.html.stx?id=716752

SFS-EN ISO 11125-6:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 6: Determination of foreign matter (ISO 11125-6:2018)

Verkkokaupan tuotteet

This document specifies a test method for the determination of foreign matter in metallic blast-cleaning abrasives. The purpose of the test is to establish the level to which the abrasive is contaminated by foreign matter. The level of foreign matter, e.g. oxides and residual metallurgical slag, ...

https://sales.sfs.fi/julkaisu.html.stx?id=708326

SFS-EN ISO 11125-5:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)

Verkkokaupan tuotteet

This document specifies test methods for the determination of the percentage of defective particles and of the microstructure of metallic blast-cleaning abrasives. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning. The typ ...

https://sales.sfs.fi/julkaisu.html.stx?id=708371

SFS-EN ISO 11125-4:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 4: Determination of apparent density (ISO 11125-4:2018)

Verkkokaupan tuotteet

This document specifies a test method for the determination of the apparent density of metallic blast-cleaning abrasives. The purpose of the test is to establish the soundness of the metallic abrasive. Significant levels of internal shrinkage or hollow particles will reduce the apparent density. ...

https://sales.sfs.fi/julkaisu.html.stx?id=708341

SFS-EN ISO 11125-3:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 3: Determination of hardness (ISO 11125-3:2018)

Verkkokaupan tuotteet

This document specifies a test method for the determination of the Vickers hardness of metallic blast-cleaning abrasives. This method is not recommended for the testing of particle sizes below 0,3 mm. NOTE Accurate testing of particles below 0,3 mm (grades S040/G050) is extremely difficult. This ...

https://sales.sfs.fi/julkaisu.html.stx?id=708359

SFS-EN ISO 11125-2:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 2: Determination of particle size distribution (ISO 11125-2:2018, Corrected version 2019-04)

Verkkokaupan tuotteet

This document specifies a test method for the determination of particle size distribution of metallic blast-cleaning abrasives by sieving. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning. The types of metallic abrasive a ...

https://sales.sfs.fi/julkaisu.html.stx?id=708372

SFS-EN ISO 11121:2017:en – Recreational diving services. Requirements for introductory programmes to scuba diving (ISO 11121:2017)

Verkkokaupan tuotteet

ISO 11121:2017 specifies minimum programme content requirements for training organizations for introductory scuba experiences in recreational scuba diving. Under no conditions are these requirements considered to be a standard for the training and qualification of scuba divers. ISO 11121:2017 app ...

https://sales.sfs.fi/julkaisu.html.stx?id=484055