Hakutulokset
Hakutulokset
Haulla "117" löytyi 260 tulosta.
ISO 1179-1:2013 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends described in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends described in ISO 1179-3.
Ports in accordance with ISO 1179-1:2013 are applicable for use with ISO 1179-2 hea ...
https://sales.sfs.fi/julkaisu.html.stx?id=240844
ISO 11771:2010 specifies a generic method for the determination and the reporting of time-averaged mass emissions from a specific installation or of a family of installations (or common source type), using data collected by measurements, and by establishing: mass emission rates by the simultaneou ...
https://sales.sfs.fi/julkaisu.html.stx?id=159403
ISO 11737-1:2018 specifies requirements and provides guidance on the enumeration and microbial characterization of the population of viable microorganisms on or in a health care product, component, raw material or package.
NOTE 1 The nature and extent of microbial characterization is dependent on ...
https://sales.sfs.fi/julkaisu.html.stx?id=644309
ISO 11721-2:2003 describes a test procedure for identification of the long-term resistance of a rot-retardant finish against the attack of microorganisms in the soil.
It permits a distinction to be made between rot-retardant finishes with no long-term resistance, with regular long-term resistance ...
https://sales.sfs.fi/julkaisu.html.stx?id=11970
ISO 11702:2016 specifies a method for the quantitative determination of the total sterols content by means of an enzymatic staining test. The method is applicable to free and esterified sterols in animal and vegetable fats and oils, fatty foods and related products. The determination is applicabl ...
https://sales.sfs.fi/julkaisu.html.stx?id=422120
This Standard specifies the requirements for inspection before, during and after the time of filling for cylinder bundles for compressed and liquefied gases, also referred to as bundles.
This Standard does not apply to acetylene bundles.
This Standard does not apply to bundles when they are a par ...
https://sales.sfs.fi/julkaisu.html.stx?id=935137
ISO 9117-6:2012 specifies a method for assessing, by means of a simple empirical test, the resistance of a coat of paint, varnish or related product to imprinting by a nylon gauze under a specified force applied for a specified time.
The method may be carried out
either as a "pass/fail" test by d ...
https://sales.sfs.fi/julkaisu.html.stx?id=223596
ISO 9117-5:2012 specifies a method for determining whether coatings, including those produced using multi-coat systems, have reached various stages of drying. Furthermore, it allows the drying speed to be assessed.
In the case of plastic coatings, it is only possible to determine to a limited ext ...
https://sales.sfs.fi/julkaisu.html.stx?id=223595
ISO 9117-4:2012 specifies a test for determining the times taken to reach various stages of drying of organic coatings, using a mechanical straight-line or circular drying-time recorder. The use of a mechanical recorder is valuable in comparing the drying behaviour of coatings of the same generic ...
https://sales.sfs.fi/julkaisu.html.stx?id=223594
ISO 9117-3:2010 specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components.
The method is not intended to apply to stoving products.
The method described may be carried ou ...
https://sales.sfs.fi/julkaisu.html.stx?id=150945
SFS-EN ISO 1179-1:en – Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 1: Threaded ports (ISO 1179-1:2013)
Verkkokaupan tuotteet
SFS-EN ISO 11771:en – Air quality. Determination of time-averaged mass emissions and emission factors. General approach (ISO 11771:2010)
Verkkokaupan tuotteet
SFS-EN ISO 11737-1:2018:en – Terveydenhuollon tuotteiden sterilointi. Mikrobiologiset menetelmät. Osa 1: Mikro-organismipopulaation määrittely tuotteissa
Verkkokaupan tuotteet
SFS-EN ISO 11721-2:en – Tekstiilit. Selluloosaa sisältävien tekstiilien kestävyys mikro-organismeja vastaan. Maahanhautausmenetelmä. Osa 2: Pitkäkestoisen lahonsuojaviimeistyksen tunnistus
Verkkokaupan tuotteet
SFS-EN ISO 11702:2016:en – Animal and vegetable fats and oils. Enzymatic determination of total sterols content (ISO 11702:2016)
Verkkokaupan tuotteet
SFS-EN ISO 11755:2020:en – Gas cylinders. Cylinder bundles for compressed and liquefied gases (excluding acetylene). Inspection at time of filling (ISO 11755:2005)
Verkkokaupan tuotteet
SFS-EN ISO 9117-6:en – Paints and varnishes. Drying tests. Part 6: Print-free test (ISO 9117-6:2012)
Verkkokaupan tuotteet
SFS-EN ISO 9117-5:en – Paints and varnishes. Drying tests. Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
Verkkokaupan tuotteet
SFS-EN ISO 9117-4:en – Paints and varnishes. Drying tests. Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
Verkkokaupan tuotteet
SFS-EN ISO 9117-3:en – Maalit ja lakat. Kuivumiskokeet. Osa 3: Pintakuivumisajan määritys mikrohelmimenetelmällä
Verkkokaupan tuotteet