Hakutulokset
Hakutulokset
Haulla "145" löytyi 377 tulosta.
ISO 14554-1:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the following: a) a contract between involved parties; b) an application standard; c) ...
https://sales.sfs.fi/julkaisu.html.stx?id=242330
This Part of CEN/TS 14507 refers to EN 60601 1:1990 "Medical electrical equipment - Part 1: General requirements for safety", as amended by its amendments 1 (1991) and 2 (1995). For brevity Part 1 is referred to in this Part of CEN/TS 14507 either as the General Standard or as the General require ...
https://sales.sfs.fi/julkaisu.html.stx?id=331
ISO 14577-4:2016 specifies a method for testing coatings which is particularly suitable for testing in the nano/micro range applicable to thin coatings. However, the application of this method of this part of ISO 14577 is not needed if the indentation depth is such a small fraction of the coating ...
https://sales.sfs.fi/julkaisu.html.stx?id=451228
ISO 14554-2:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the following: a) a contract between involved parties; b) an application standard; c) ...
https://sales.sfs.fi/julkaisu.html.stx?id=242331
1.1 This part of ISO 14530 establishes a data block system for the designation of unsaturated-polyester powder moulding compounds (UP-PMCs).
1.2 The various types of UP-PMC are differentiated from each other by a classification system based on information about the filler/reinforcement type and c ...
https://sales.sfs.fi/julkaisu.html.stx?id=12428
1.1 This part of ISO 14529 establishes a data block system for the designation of melamine/phenolic powder moulding compounds (MP-PMCs).
1.2 The various types of MP-PMC are differentiated from each other by a classification system based on information about the filler/reinforcement type and conte ...
https://sales.sfs.fi/julkaisu.html.stx?id=12425
1.1 This part of ISO 14528 establishes a data block system for the designation of melamine-formaldehyde powder moulding compounds (MF-PMCs).
1.2 The various types of MF-PMC are differentiated from each other by a classification system based on information about the filler/reinforcement type and c ...
https://sales.sfs.fi/julkaisu.html.stx?id=12422
1.1 This part of ISO 14527 establishes a data block system for the designation of urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs).
1.2 The various types of UF- and UF/MF-PMC are differentiated from each other by a classification system based on info ...
https://sales.sfs.fi/julkaisu.html.stx?id=12419
1.1 This part of ISO 14526 establishes a data block system for the designation of phenolic powder moulding compounds (PF-PMCs).
1.2 The various types of PF-PMC are differentiated from each other by a classification system based on information about the filler/reinforcement type and content, the i ...
https://sales.sfs.fi/julkaisu.html.stx?id=12416
ISO 1452-5:2009 specifies the characteristics for the fitness for purpose of unplasticized poly(vinyl chloride) (PVC-U) piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referre ...
https://sales.sfs.fi/julkaisu.html.stx?id=161216
SFS-EN ISO 14554-1:en – Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 1: Kattavat laatuvaatimukset
Verkkokaupan tuotteet
CEN/TS 14507-1:en – Typpioksidin inhalaatiojärjestelmät. Osa 1: Annostelujärjestelmät
Verkkokaupan tuotteet
SFS-EN ISO 14577-4:2016:en – Metallien instrumentoitu painumakoe kovuuden ja muiden materiaaliominaisuuksien määrittämiseksi. Osa 4: Menetelmä metallisille ja ei-metallisille pinnoitteille
Verkkokaupan tuotteet
SFS-EN ISO 14554-2:en – Hitsauksen laatuvaatimukset. Metallien vastushitsaus. Osa 2: Peruslaatuvaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 14530-1:en – Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Part 1: Designation system and basis for specifications (ISO 14530-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 14529-1:en – Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Part 1: Designation system and basis for specifications (ISO 14529-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 14528-1:en – Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Part 1: Designation system and basis for specifications (ISO 14528-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 14527-1:en – Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 14526-1:en – Plastics. Phenolic powder moulding compounds (PF-PMCs). Part 1: Designation system and basis for specifications (ISO 14526-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 1452-5:en – Muoviputkijärjestelmät paineellisen veden johtamiseen ja paineviemäröintiin. Pehmittämätön polyvinyylikloridi (PVC-U). Osa 5: Soveltuvuus järjestelmäkäyttöön
Verkkokaupan tuotteet