Siirry sisältöön

Hakutulokset

Hakutulokset

Haulla "147" löytyi 285 tulosta.

SFS-EN ISO 14732:en – Hitsaushenkilöstö. Hitsausoperaattoreiden ja hitsausasettajien pätevyyskokeet. Metallisten materiaalien mekanisoitu ja automatisoitu hitsaus

Verkkokaupan tuotteet
ISO 14732:2013 specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding. ISO 14732:2013 does not apply to personnel exclusively performing loading or unloading of the automatic welding unit. ISO 14732:2013 is applicable when qualific ...
https://sales.sfs.fi/julkaisu.html.stx?id=237806

SFS-EN ISO 14720-1:en – Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Part 1: Infrared measurement methods (ISO 14720-1:2013)

Verkkokaupan tuotteet
ISO 14720-1:2013 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, such as silicon carbides, silicon nitrides, graphites, carbon blacks, cokes, carbon powders. If proved by the recovery rate, this method can also be applied f ...
https://sales.sfs.fi/julkaisu.html.stx?id=236628

SFS-EN ISO 14723:en – Öljy- ja maakaasuteollisuus. Siirtoputkistojärjestelmät. Vedenalaiset putkiventtiilit (ISO 14723:2009)

Verkkokaupan tuotteet
ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries. ISO ...
https://sales.sfs.fi/julkaisu.html.stx?id=138868

SFS-EN ISO 14720-2:en – Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013)

Verkkokaupan tuotteet
This part of ISO 14720 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials. For materials which are not completel ...
https://sales.sfs.fi/julkaisu.html.stx?id=236627

SFS-EN ISO 14719:en – Chemical analysis of refractory material glass and glazes. Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011)

Verkkokaupan tuotteet
ISO 14719:2011 specifies a spectral photometric method with 1,10-phenanthroline for the quantitative determination of Fe2+ and Fe3+ in oxidic raw and basic materials for ceramics, glass and glazes, e.g. feldspar, kaolinites, clay, limestone, quartz refractory materials. ISO 14719:2011 could be ex ...
https://sales.sfs.fi/julkaisu.html.stx?id=183420

SFS-EN ISO 14713-1:2017:en – Sinkkipinnoitteet. Ohjeet ja suositukset rauta- ja teräsrakenteiden korroosionestoon. Osa 1: Yleiset suunnitteluperiaatteet ja korroosionkestävyys

Verkkokaupan tuotteet
ISO 14713-1:2017 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety ...
https://sales.sfs.fi/julkaisu.html.stx?id=495379

SFS-EN ISO 15147:en – Kevytrakenteiset kuljetushihnat. Leikattujen kevytrakenteisten kuljetushihnojen leveys- ja pituustoleranssit

Verkkokaupan tuotteet
ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions. The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry St ...
https://sales.sfs.fi/julkaisu.html.stx?id=203736