Siirry sisältöön

Hakutulokset

Hakutulokset

Haulla "213" löytyi 194 tulosta.

SFS-EN ISO 21329:en – Öljy- ja maakaasuteollisuus. Siirtoputkistojärjestelmät. Mekaanisten liitinten testimenetelmät

Verkkokaupan tuotteet
ISO 21329:2004 specifies requirements and provides guidance for the testing of mechanical connectors for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623. The tests specified in ISO 21329:2004 are intended to form part of the design veri ...
https://sales.sfs.fi/julkaisu.html.stx?id=13227

SFS-EN ISO 12213-3:en – Maakaasu. Puristuskertoimen laskenta. Osa 3: Laskenta fysikaalisia ominaisuuksia käyttäen (ISO 12213-3:2006)

Verkkokaupan tuotteet
ISO 12213 specifies methods for the calculation of compression factors of natural gases, natural gases containing a synthetic admixture and similar mixtures at conditions under which the mixture can exist only as a gas. It is divided into three parts: this part, ISO 12213-3:2006, specifies a meth ...
https://sales.sfs.fi/julkaisu.html.stx?id=146546

SFS-EN ISO 12213-2:en – Maakaasu. Puristus-kertoimen laskenta. Osa 2: Laskenta moolirakennetta käyttäen (ISO12213-2:2006)

Verkkokaupan tuotteet
ISO 12213 specifies methods for the calculation of compression factors of natural gases, natural gases containing a synthetic admixture and similar mixtures at conditions under which the mixture can exist only as a gas. It is divided into three parts: this part, ISO 12213-2:2006, specifies a meth ...
https://sales.sfs.fi/julkaisu.html.stx?id=143984

SFS-EN ISO 21304-1:2019:en – Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Part 1: Designation system and basis for specifications (ISO 21304-1:2019)

Verkkokaupan tuotteet
This document establishes a system of designation for thermoplastic PE-UHMW materials, which can be used as the basis for specifications. For the purposes of this document, PE-UHMW materials are polyethylene materials having a melt mass-flow rate (MFR) of less than 0,1 g/10 min, measured at 190 Â ...
https://sales.sfs.fi/julkaisu.html.stx?id=762620

SFS-EN ISO 21309-2:2019:en – Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019)

Verkkokaupan tuotteet
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test mater ...
https://sales.sfs.fi/julkaisu.html.stx?id=754672

SFS-EN ISO 21309-1:2019:en – Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Part 1: Designation system and basis for specifications (ISO 21309-1:2019)

Verkkokaupan tuotteet
This document establishes a system of designation for ethylene/vinyl alcohol (EVOH) copolymer thermoplastic materials, which may be used as the basis for specifications. The types of ethylene/vinyl alcohol (EVOH) copolymer plastic are differentiated from each other by a classification system base ...
https://sales.sfs.fi/julkaisu.html.stx?id=754675

SFS-EN ISO 21306-2:2019:en – Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Part 2: Preparation of test specimens and determination of properties (ISO 21306-2:2019)

Verkkokaupan tuotteet
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PVC-U moulding and extrusion materials. Requirements for handling test materials and for conditioning both the test material before moulding and the specimens befo ...
https://sales.sfs.fi/julkaisu.html.stx?id=760585

SFS-EN ISO 21306-1:2019:en – Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Part 1: Designation system and basis for specifications (ISO 21306-1:2019)

Verkkokaupan tuotteet
This document establishes a system of designation for unplasticized PVC thermoplastic material which may be used as the basis for specifications. The types of PVC-U plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) ...
https://sales.sfs.fi/julkaisu.html.stx?id=759443

SFS-EN ISO 21305-2:2019:en – Plastics. Polycarbonate (PC) moulding and extrusion materials. Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)

Verkkokaupan tuotteet
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specime ...
https://sales.sfs.fi/julkaisu.html.stx?id=750704