Hakutulokset
Hakutulokset
Haulla "224" löytyi 299 tulosta.
ISO 22477-4:2018 establishes the specifications for the execution of dynamic load tests in which a single pile is subject to an axial dynamic load in compression.
ISO 22477-4:2018 outlines the methods of testing required to allow assessment of pile resistance to be determined from the following m ...
https://sales.sfs.fi/julkaisu.html.stx?id=664217
ISO 22477-10:2016 establishes the specifications for the execution of rapid load pile tests in which a single pile is subject to an axial load in compression to measure its load-displacement behaviour under rapid loading and to allow an assessment of its measured compressive resistance (Rc,m) and ...
https://sales.sfs.fi/julkaisu.html.stx?id=435145
ISO 22476-10 specifies the equipment, execution and reporting requirements of the weight sounding test.
NOTE ISO 22476-10 fulfils the requirements for the weight sounding test as part of the geotechnical investigation and testing according to EN 1997?1 and EN 1997?2.
ISO 22476-10 specifies the pr ...
https://sales.sfs.fi/julkaisu.html.stx?id=626071
ISO 14224:2016 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes ...
https://sales.sfs.fi/julkaisu.html.stx?id=439542
ISO 9224:2012 specifies guiding values of corrosion attack for metals and alloys exposed to natural outdoor atmospheres for exposures greater than one year. It is intended to be used in conjunction with ISO 9223.
Guiding corrosion values for standard structural materials can be used for engineeri ...
https://sales.sfs.fi/julkaisu.html.stx?id=183791
ISO 22476-7:2012 specifies the equipment requirements, execution of and reporting on borehole jack tests.
It specifies the procedure for conducting a borehole jack test in ground stiff enough not to be adversely affected by the drilling operation. Two diametral cylindrical steel loading plates ar ...
https://sales.sfs.fi/julkaisu.html.stx?id=203473
ISO 22476-3:2004 specifies requirements for indirect investigations of soil by standard penetration tests within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2 to compliment direct investigations (e.g. sampling according to EN ISO 22475-1).
The standards writi ...
https://sales.sfs.fi/julkaisu.html.stx?id=13287
ISO 22476-15:2016 specifies the technical principles for measuring equipment requirements, the execution and reporting on the parameters of the investigation drilling process for geotechnical purposes.
It is applicable to top-driven, destructive drilling methods performed by a fully hydraulically ...
https://sales.sfs.fi/julkaisu.html.stx?id=426009
ISO 22476-12:2009 specifies a mechanical cone penetration test (CPTM), including equipment requirements, execution and reporting. The results from such geotechnical testing are especially suited to the qualitative and/or quantitative determination of a soil profile — together with direct invest ...
https://sales.sfs.fi/julkaisu.html.stx?id=129059
ISO 22442-3:2007 specifies requirements for the validation of the elimination and/or inactivation of viruses and TSE agents during the manufacture of medical devices (excluding in vitro diagnostic medical devices) utilizing animal tissue or products derived from animal tissue, which are non-viabl ...
https://sales.sfs.fi/julkaisu.html.stx?id=101132
SFS-EN ISO 22477-4:2018:en – Geotechnical investigation and testing. Testing of geotechnical structures. Part 4: Testing of piles: dynamic load testing (ISO 22477-4:2018)
Verkkokaupan tuotteet
SFS-EN ISO 22477-10:2016:en – Geotechnical investigation and testing. Testing of geotechnical structures. Part 10: Testing of piles: rapid load testing (ISO 22477-10:2016)
Verkkokaupan tuotteet
SFS-EN ISO 22476-10:2017:en – Geotechnical investigation and testing. Field testing. Part 10: Weight sounding test (ISO 22476-10:2017)
Verkkokaupan tuotteet
SFS-EN ISO 14224:2016:en – Öljy-, petrokemiallinen - ja maakaasuteollisuus. Laitteiden käyttövarmuus- ja huoltotiedon kerääminen
Verkkokaupan tuotteet
SFS-EN ISO 9224:en – Metallien ja metalliseosten korroosio. Ilmaston syövyttävyys. Syövyttävyysluokkien ohjearvot
Verkkokaupan tuotteet
SFS-EN ISO 22476-7:en – Geotechnical investigation and testing. Field testing. Part 7: Borehole jack test (ISO 22476-7:2012)
Verkkokaupan tuotteet
SFS-EN ISO 22476-3:en – Geotechnical investigation and testing. Field testing. Part 3: Standard penetration test (ISO 22476-3:2005)
Verkkokaupan tuotteet
SFS-EN ISO 22476-15:2016:en – Geotechnical investigation and testing. Field testing. Part 15: Measuring while drilling (ISO 22476-15:2016)
Verkkokaupan tuotteet
SFS-EN ISO 22476-12:en – Geotekninen tutkimus ja koestus. Kenttäkokeet. Osa 12: Mekaaninen puristinkairauskoe (CPTM -koe)
Verkkokaupan tuotteet
SFS-EN ISO 22442-3:en – Eläinperäisiä kudoksia ja niiden johdannaisia sisältävät lääkinnälliset laitteet. Osa 3: Virusten ja tarttuvien sienimäisten enkefalopatia-aineiden (TSE) hävittämisen ja/tai inaktivoimisen arviointi
Verkkokaupan tuotteet