Siirry sisältöön
Suomi English

Hakutulokset

Hakutulokset

Näytä suodattimet Piilota suodattimet
Haulla "262" löytyi 116 tulosta.

SFS-EN ISO 17262:en – Älykkäät liikennejärjestelmät. Ajoneuvojen ja laitteiden automaattinen tunnistus. Numerointi ja tietorakenteet

Verkkokaupan tuotteet
ISO 17262:2012 defines generic numbering and data structures for unambiguous identification of equipment used for Intermodal goods transport. These data are known as "Intermodal Goods Transport Numbering and Data Structures". It defines data independently of the data carrier. The modelling of dat ...
https://sales.sfs.fi/julkaisu.html.stx?id=222549

SFS-ISO 26262-11:2019:en – Tieajoneuvot. Toiminnallinen turvallisuus. Osa 11: Ohjeita standardin ISO 26262 soveltamiseen puolijohteisiin

Verkkokaupan tuotteet
This document is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production road vehicles, excluding mopeds. This document does not address unique E/E systems in special vehicles such as E/E syst ...
https://sales.sfs.fi/julkaisu.html.stx?id=747047

SFS-EN ISO 3262-1:2020:en – Extenders. Specifications and methods of test. Part 1: Introduction and general test methods (ISO 3262-1:2020)

Verkkokaupan tuotteet
This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262. NOTE The subsequent parts of ISO 3262 specify requirements and the corresponding methods of test for extenders for use in paints, related coating mat ...
https://sales.sfs.fi/julkaisu.html.stx?id=878811

SFS-EN ISO 26203-2:en – Metallic materials. Tensile testing at high strain rates. Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)

Verkkokaupan tuotteet
ISO 26203-2:2011 gives requirements for the testing of metallic materials. Only examples for testing flat geometries are given; however, other geometries can be tested. The area of application spans a range of strain rates from 10-2 s-1 to 103 s-1. Tests are carried out between 10 °C and 35 °C ...
https://sales.sfs.fi/julkaisu.html.stx?id=177181

SFS-EN ISO 26203-1:2018:en – Metallic materials. Tensile testing at high strain rates. Part 1: Elastic-bar-type systems (ISO 26203-1:2018)

Verkkokaupan tuotteet
ISO 26203-1:2018 specifies methods for testing metallic sheet materials to determine the stress-strain characteristics at high strain rates. This document covers the use of elastic-bar-type systems. The strain-rate range between 10-3 and 103 s-1 is considered to be the most relevant to vehicle cr ...
https://sales.sfs.fi/julkaisu.html.stx?id=654697

SFS-EN ISO 13262:2017:en – Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam (ISO 13262:2010)

Verkkokaupan tuotteet
ISO 13262:2010 specifies a method for determining the tensile strength of a seam in a spirally-formed thermoplastics pipe. It is applicable to all such thermoplastics pipes, regardless of their intended use The standards writing body responsible for this document in Finland is Finnish Plastics ...
https://sales.sfs.fi/julkaisu.html.stx?id=569873
Poutapilvi web design