Hakutulokset
Hakutulokset
Haulla "345" löytyi 128 tulosta.
This part of ISO 3451 specifies methods for determination of the ash of polyamides, both filled and unfilled. The general procedures given in ISO 3451-1 are followed. For unfilled materials method A or method C of ISO 3451-1:1997 is used. For filled and glass-fibre reinforced materials method A o ...
https://sales.sfs.fi/julkaisu.html.stx?id=13497
This document specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics. The particular conditions chosen can be included in the specifications for the plastic material in question.
Particular conditions applicable to poly(alkylene terephtha ...
https://sales.sfs.fi/julkaisu.html.stx?id=750733
ISO 3452-3:2013 describes two types of reference blocks: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colo ...
https://sales.sfs.fi/julkaisu.html.stx?id=242261
This part of ISO 3451 specifies three methods for the determination of the ash of poly(vinyl chloride). The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finishe ...
https://sales.sfs.fi/julkaisu.html.stx?id=13498
ISO 3450:2011 specifies minimum performance requirements and test procedures for the service, secondary and parking brake systems of wheeled and high-speed rubber-tracked earth-moving machines, for the uniform assessment of those brake systems.
It is applicable to the following earth-moving machi ...
https://sales.sfs.fi/julkaisu.html.stx?id=177791
https://sales.sfs.fi/julkaisu.html.stx?id=1001278
ISO 7345:2018 defines physical quantities used in the thermal performance of buildings and building elements, and gives the corresponding symbols and units.
NOTE Because the scope of this document is restricted to thermal performance and energy use in the built environment, some of the definition ...
https://sales.sfs.fi/julkaisu.html.stx?id=662371
ISO 3458:2015 specifies the method of test for checking the leak tightness of assembled joints between mechanical fittings and plastic pressure pipes. The test applies regardless of the design and material of the fitting used for jointing plastic pipe.
The standards writing body responsible for ...
https://sales.sfs.fi/julkaisu.html.stx?id=377662
ISO 3452-6:2008 specifies the requirements for non-destructive testing using penetrant, particular to applications at low temperatures (lower than + 10 °C) as well as the method for qualification of suitable testing products.
The standards writing body responsible for this document in Finland ...
https://sales.sfs.fi/julkaisu.html.stx?id=115945
ISO 3452-5:2008 specifies the requirements for non-destructive testing using penetrant, particular to applications at higher temperatures (higher than 50 °C) as well as the method for qualification of suitable testing products.
The standards writing body responsible for this document in Finlan ...
https://sales.sfs.fi/julkaisu.html.stx?id=115944
SFS-EN ISO 3451-4:en – Plastics. Determination of ash. Part 4: Polyamides (ISO 3451-4:1998)
Verkkokaupan tuotteet
SFS-EN ISO 3451-1:2019:en – Plastics. Determination of ash. Part 1: General methods (ISO 3451-1:2019)
Verkkokaupan tuotteet
SFS-EN ISO 3452-3:en – Rikkomaton aineenkoetus. Tunkeumanestetarkastus. Osa 3: Vertailukappaleet
Verkkokaupan tuotteet
SFS-EN ISO 3451-5:en – Plastics. Determination of ash. Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
Verkkokaupan tuotteet
SFS-EN ISO 3450:en – Maansiirtokoneet. Pyöräalaustaiset tai nopeakulkuiset kumitelaiset koneet. Kumipyöräalustaisten koneiden jarrujärjestelmät. Jarrujärjestelmien toimintavaatimukset sekä testausmenetelmät
Verkkokaupan tuotteet
SFS-EN ISO 3452-2:2021:en – Non-destructive testing. Penetrant testing. Part 2: Testing of penetrant materials (ISO 3452-2:2021)
Verkkokaupan tuotteet
SFS-EN ISO 7345:2018:en – Thermal performance of buildings and building components. Physical quantities and definitions (ISO 7345:2018)
Verkkokaupan tuotteet
SFS-EN ISO 3458:en – Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure (ISO 3458:2015)
Verkkokaupan tuotteet
SFS-EN ISO 3452-6:en – Rikkomaton aineenkoetus. Tunkeumanestetarkastus. Osa 6: Tunkeumanestetarkastus alle 10o lämpötiloissa
Verkkokaupan tuotteet
SFS-EN ISO 3452-5:en – Rikkomaton aineenkoetus. Tunkeumanestetarkastus. Tunkeumanestetarkastus yli 50oC lämpötiloissa
Verkkokaupan tuotteet