Hakutulokset
Hakutulokset
Haulla "445" löytyi 124 tulosta.
This Technical Report presents an application of EN 13445 through an example of design and fabrication of an unfired pressure vessel. Every step is described as far as possible:
- Material choice;
- Design and calculation;
- Fabrication;
- Inspection and testing;
using the following part of EN 13 ...
https://sales.sfs.fi/julkaisu.html.stx?id=378123
ISO 9445-1:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.
Narrow strip and cut lengths with ...
https://sales.sfs.fi/julkaisu.html.stx?id=151217
ISO 9445-2:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,30 mm to 8,0 mm and in rolling widths from 600 mm to 2 100 mm. It also applies to slit cold-rolled wide strip in widths less than 600 mm m ...
https://sales.sfs.fi/julkaisu.html.stx?id=151218
ISO 445:2013 defines terms relating to pallets for unit load methods of materials handling.
It also includes informative annexes listing terms relating to unit load handling and slipsheets.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=236708
ISO 13445:2003 specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive. The method provides an estimate of the shear strength of an adhesive on various machinable and non-machinable subs ...
https://sales.sfs.fi/julkaisu.html.stx?id=12209
This CEN Technical Report details the conformance of the EN 13445 series for "Unfired pressure vessels" to ISO 16528-1 "Boilers and pressure vessels - Part 1: Performance requirements".
This Technical Report applies to vessels of steel construction.
It is envisaged that future editions will inclu ...
https://sales.sfs.fi/julkaisu.html.stx?id=172197
Standardin ISO 9445 tässä osassa esitetään mitta- ja muototoleranssit kylmävalssatuille ruostumattomille kapeille teräsnauhoille, joiden paksuus on enintään 3 mm ja valssausleveys alle 600 mm. Standardi koskee myös tällaisista nauhoista leikattuja levyjä.
Leveästä nauhasta pituuss ...
https://sales.sfs.fi/julkaisu.html.stx?id=167481
https://sales.sfs.fi/julkaisu.html.stx?id=996223
Tässä asiakirjassa määritellään termit, määritelmät, suureet, tunnukset ja yksiköt, joita käytetään läpi koko EN 13445 -standardisarjan ja esitetään ohjeita koskien säiliöiden suunnittelua ja valmistusta tämän standardin mukaisesti.
Se sisältää myös ohjeet standardin kä ...
https://sales.sfs.fi/julkaisu.html.stx?id=1025769
https://sales.sfs.fi/julkaisu.html.stx?id=1028409
CEN/TR 13445-101:en – Unfired pressure vessels. Example of application
Verkkokaupan tuotteet
SFS-EN ISO 9445-1:en – Kylmävalssatut ruostumattomat teräkset. Mitta- ja muototoleranssit. Osa 1: Kapeat nauhat ja levyt
Verkkokaupan tuotteet
SFS-EN ISO 9445-2:en – Kylmävalssatut ruostumattomat teräkset. Mitta- ja muototoleranssit. Osa 2: Leveät nauhat ja levyt
Verkkokaupan tuotteet
SFS-EN ISO 445:en – Kuormalavat. Sanasto
Verkkokaupan tuotteet
SFS-EN ISO 13445:en – Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
Verkkokaupan tuotteet
CEN/TR 13445-9:en – Unfired pressure vessels. Part 9: Conformance of the EN 13445 series to ISO 16528
Verkkokaupan tuotteet
SFS-EN ISO 9445-1 – Kylmävalssatut ruostumattomat teräkset. Mitta- ja muototoleranssit. Osa 1: Kapeat nauhat ja levyt
Verkkokaupan tuotteet
SFS-EN 13445-10:2021:en – Unfired pressure vessels. Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
Verkkokaupan tuotteet
SFS-EN 13445-1:2021 – Lämmittämättömät painesäiliöt. Osa 1: Yleistä
Verkkokaupan tuotteet
SFS-EN IEC 60445:2021:en – Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors
Verkkokaupan tuotteet