Hakutulokset
Hakutulokset
Haulla "507" löytyi 153 tulosta.
This Part of CEN/TS 14507 refers to EN 60601 1:1990 "Medical electrical equipment - Part 1: General requirements for safety", as amended by its amendments 1 (1991) and 2 (1995). For brevity Part 1 is referred to in this Part of CEN/TS 14507 either as the General Standard or as the General require ...
https://sales.sfs.fi/julkaisu.html.stx?id=331
ISO 6507-2:2018 specifies a method of verification and calibration of testing machines and diagonal measuring system for determining Vickers hardness in accordance with ISO 6507-1.
A direct method of verification and calibration is specified for the testing machine, indenter and the diagonal leng ...
https://sales.sfs.fi/julkaisu.html.stx?id=654716
ISO 6507-4:2018 gives tables of Vickers hardness for use in tests carried out in accordance with ISO 6507-1.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=658627
ISO 6507-3:2018 specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines, as specified in ISO 6507-2.
The method is applicable only for indentations with diagonals =0,020 mm.
The standards writing body responsible f ...
https://sales.sfs.fi/julkaisu.html.stx?id=654723
IEC 60811-507:2012 gives the procedure for the hot set test, which typically applies to cross-linkable compounds used for insulating and sheathing materials. IEC 60811-507:2012 cancels and replaces Clause 9 of IEC 60811-2-1:1998, which is withdrawn. Full details of the replacements are shown in ...
https://sales.sfs.fi/julkaisu.html.stx?id=335357
ISO 5077:2007 specifies a method for the determination of the dimensional change of fabrics, garments or other textile articles when subjected to an appropriate combination of specified washing and drying procedures.
The standards writing body responsible for this document in Finland is Finnish ...
https://sales.sfs.fi/julkaisu.html.stx?id=103142
Specifies the particular test conditions for determining the Vicat softening temperature of ABS and ASA pipes and fittings (the general test method is given in ISO 2507-1). Also gives, for information, the corresponding basic specifications.
The standards writing body responsible for this docum ...
https://sales.sfs.fi/julkaisu.html.stx?id=568582
Specifies the particular test conditions for determining the Vicat softening temperature of PVC-U and PVC-C pipes and fittings as well as PVC-HI pipes (the general test method is given in ISO 2507-1). Also gives, for information, the corresponding basic specifications.
The standards writing bod ...
https://sales.sfs.fi/julkaisu.html.stx?id=568603
IEC 60092-507:2014 specifies requirements for the design, construction and installation of electrical systems in small vessels, which have a length of up to 50 m, or which have a gross tonnage not exceeding 500 Gross Tonnes (GT), designed for use on inland waters or at sea. It is not intended to ...
https://sales.sfs.fi/julkaisu.html.stx?id=373302
This International Standard specifies methods for determining the case-hardening depth of carburized or carbonitrided sintered ferrous materials by micro-hardness measurement.
The methods are adapted to materials having porosity and only apply to quenched materials.
The standards writing body r ...
https://sales.sfs.fi/julkaisu.html.stx?id=13671
CEN/TS 14507-1:en – Typpioksidin inhalaatiojärjestelmät. Osa 1: Annostelujärjestelmät
Verkkokaupan tuotteet
SFS-EN ISO 6507-2:2018:en – Metallien Vickersin kovuuskoe. Osa 2: Kovuusmittareiden varmentaminen ja kalibrointi
Verkkokaupan tuotteet
SFS-EN ISO 6507-4:2018:en – Metallien Vickersin kovuuskoe. Osa 4: Kovuusarvojen taulukot
Verkkokaupan tuotteet
SFS-EN ISO 6507-3:2018:en – Metallien Vickersin kovuuskoe. Osa 3: Vertailukovuuspalojen kalibrointi
Verkkokaupan tuotteet
SFS-EN 60811-507:en – Electric and optical fibre cables – Test methods for non-metallic materials – Part 507: Mechanical tests – Hot set test for cross-linked materials
Verkkokaupan tuotteet
SFS-EN ISO 5077:en – Tekstiilit. Mittamuutosten määrittäminen pesussa ja kuivauksessa
Verkkokaupan tuotteet
SFS-EN ISO 2507-3:2017:en – Thermoplastics pipes and fittings. Vicat softening temperature. Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
Verkkokaupan tuotteet
SFS-EN ISO 2507-2:2017:en – Thermoplastics pipes and fittings. Vicat softening temperature. Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
Verkkokaupan tuotteet
SFS-EN 60092-507:en – Electrical installations in ships – Part 507 – Small vessels
Verkkokaupan tuotteet
SFS-EN ISO 4507:en – Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
Verkkokaupan tuotteet