Hakutulokset
Hakutulokset
Haulla "672" löytyi 89 tulosta.
IEC 61672-3:2013 describes procedures for periodic testing of time-weighting, integrating-averaging, and integrating sound level meters that were designed to conform to the class 1 or class 2 specifications of the second edition of IEC 61672-1. The aim of the standard is to ensure that periodic t ...
https://sales.sfs.fi/julkaisu.html.stx?id=352816
IEC 61672-2:2013 provides details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61672-1 for time-weighting sound level meters, integrating-averaging sound level meters, and integrating sound level meters. Pattern-evaluation tests apply for each channel ...
https://sales.sfs.fi/julkaisu.html.stx?id=352818
This part of ISO 3672 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of unsaturated-polyester resins. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before ...
https://sales.sfs.fi/julkaisu.html.stx?id=13523
1.1 This part of ISO 3672 establishes a data block system for the designation of unsaturated-polyester resins (UP-R).
1.2 The various types of UP-R are differentiated from each other by a classification system based on information about the basic polymer parameters, the possible fillers/reinforce ...
https://sales.sfs.fi/julkaisu.html.stx?id=13522
This document specifies two methods (A and B) for determining the linear dynamic mechanical properties of plastics, i.e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz.
NOTE The tempera ...
https://sales.sfs.fi/julkaisu.html.stx?id=775949
The various parts of ISO 6721 specify methods for the determination of the dynamic mechanical properties of rigid plastics within the region of linear viscoelastic behaviour. This document specifies the definitions and describes the general principles including all aspects that are common to the ...
https://sales.sfs.fi/julkaisu.html.stx?id=774805
ISO 21672-2:2012 specifies the designation of periodontal probes.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=222555
1 Scope
This part of ISO 21672 specifies general requirements and test methods for periodontal probes.
It is applicable to periodontal probes made of austenitic and martensitic stainless steel.
It is not applicable to periodontal probes with working ends made completely of plastics, nor to HAUER ...
https://sales.sfs.fi/julkaisu.html.stx?id=195439
ISO 17672:2016 specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition, but not necessarily to the major element present.
The standards writing body responsible for this document in Finland ...
https://sales.sfs.fi/julkaisu.html.stx?id=433270
https://sales.sfs.fi/julkaisu.html.stx?id=975639
SFS-EN 61672-3:en – Electroacoustics – Sound level meters – Part 3: Periodic tests
Verkkokaupan tuotteet
SFS-EN 61672-2:en – Electroacoustics – Sound level meters – Part 2: Pattern evaluation tests
Verkkokaupan tuotteet
SFS-EN ISO 3672-2:en – Plastics. Unsaturated-polyester resins (UP-R). Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
Verkkokaupan tuotteet
SFS-EN ISO 3672-1:en – Plastics. Unsaturated-polyester resins (UP-R). Part 1: Designation system (ISO 3672-1:2000)
Verkkokaupan tuotteet
SFS-EN ISO 6721-2:2019:en – Plastics. Determination of dynamic mechanical properties. Part 2: Torsion-pendulum method (ISO 6721-2:2019)
Verkkokaupan tuotteet
SFS-EN ISO 6721-1:2019:en – Plastics. Determination of dynamic mechanical properties. Part 1: General principles (ISO 6721-1:2019)
Verkkokaupan tuotteet
SFS-EN ISO 21672-2:en – Hammaslääketiede. Ientaskun mittauksessa käytettävät käsi-instrumentit. Osa 2: Merkintä
Verkkokaupan tuotteet
SFS-EN ISO 21672-1:en – Hammaslääketiede. Ientaskun mittauksessa käytettävät käsi-instrumentit. Osa 1: Yleiset vaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 17672:2016:en – Kovajuotto. Juotteet
Verkkokaupan tuotteet
SFS-EN ISO 6721-3:2021:en – Plastics. Determination of dynamic mechanical properties. Part 3: Flexural vibration. Resonance-curve method (ISO 6721-3:2021)
Verkkokaupan tuotteet