Hakutulokset
Hakutulokset
Haulla "797" löytyi 80 tulosta.
ISO 18797-1:2016 specifies the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of external coating for steel risers pipes used in the splash zone, their field joints and clamps/guides, using an elastomeric ...
https://sales.sfs.fi/julkaisu.html.stx?id=545467
ISO 15797:2017 specifies test procedures and equipment which can be used in the evaluation of workwear (including, where appropriate, for some PPE garments) intended to be industrially laundered. They serve as a basis for testing relevant properties such as dimensional stability, colour character ...
https://sales.sfs.fi/julkaisu.html.stx?id=648363
ISO 1797:2017 specifies the requirements for dimensions and material properties of shanks used in dentistry for rotary or oscillating instruments. It describes the measurement methods for the verification of the requirements.
ISO 1797:2017 is not applicable to tips fixed to the handpiece with a s ...
https://sales.sfs.fi/julkaisu.html.stx?id=499166
This document specifies a routine method for the determination of bulk density, called "mass per hectolitre", of cereals as grain using manual or automatic, mechanical, electric or electronic mass per hectolitre measuring instruments.
NOTE Further details of the measuring instruments are specifie ...
https://sales.sfs.fi/julkaisu.html.stx?id=750671
ISO 7971-1:2009 specifies the reference method for the determination of bulk density, called “mass per hectolitre”, of cereals as grain.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=131588
ISO 4797:2015 specifies requirements for an internationally acceptable series of boiling flasks with conical ground joints for general laboratory purposes.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=400039
This Technical Report provides guidance on the statistical assessment of declared values with respect to the release, emission and/or content of dangerous substances. This report provides statistically-based criteria for type-testing (TT), further-testing (FT) and where a product has been shown t ...
https://sales.sfs.fi/julkaisu.html.stx?id=390237
This Technical Report provides guidance on the statistical assessment of declared values with respect to the release, emission and/or content of dangerous substances. This Technical Report provides statistically-based criteria for type-testing (TT), further-testing (FT) and where a product has be ...
https://sales.sfs.fi/julkaisu.html.stx?id=390235
https://sales.sfs.fi/julkaisu.html.stx?id=1034153
The method is based on preparation of a suspension of flour in water, followed by recording of the viscosity of the suspension which is heated at a constant rate from 30 °C to the temperature corresponding to the moment at which viscosity starts to decrease, having reached its maximum (approxima ...
https://sales.sfs.fi/julkaisu.html.stx?id=399419
SFS-EN ISO 18797-1:2017:en – Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings. Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
Verkkokaupan tuotteet
SFS-EN ISO 15797:2018:en – Tekstiilit. Teollisen pesun ohjelmat työvaatteiden testaamiseen
Verkkokaupan tuotteet
SFS-EN ISO 1797:2017:en – Hammaslääketiede. Pyörivien, värähtelevien ja edestakaisin liikkuvien instrumenttien varret
Verkkokaupan tuotteet
SFS-EN ISO 7971-3:2019:en – Cereals. Determination of bulk density, called mass per hectolitre. Part 3: Routine method (ISO 7971-3:2019)
Verkkokaupan tuotteet
SFS-EN ISO 7971-1:en – Cereals. Determination of bulk density, called mass per hectolitre. Part 1: Reference method (ISO 7971-1:2009)
Verkkokaupan tuotteet
SFS-EN ISO 4797:en – Laboratoriolasitavarat. Kartiomalliset keittopullot
Verkkokaupan tuotteet
CEN/TR 16797-2:en – Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values. Part 2: Technical and statistical background
Verkkokaupan tuotteet
CEN/TR 16797-1:en – Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values. Part 1: Principles and rules of application
Verkkokaupan tuotteet
SFS-EN ISO 18797-2:2021:en – Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings. Part 2: Maintenance and field repair coatings for riser pipes (ISO 18797-2:2021)
Verkkokaupan tuotteet
SFS-EN ISO 7973:en – Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph (ISO 7973:1992)
Verkkokaupan tuotteet