Hakutulokset
Hakutulokset
Haulla "809" löytyi 105 tulosta.
ISO 21809-3:2016 specifies requirements for field joint coating of seamless or welded steel pipes for buried and submerged sections of pipeline transportation systems used in the petroleum, petrochemical and natural gas industries as defined in ISO 13623. This part of ISO 21809 specifies the qual ...
https://sales.sfs.fi/julkaisu.html.stx?id=406953
ISO 8099-1:2018 specifies requirements for the design, construction and installation of systems for temporary retention of sewage for subsequent disposal. It applies to small craft with a length of hull (LH) of up to 24 m.
ISO 8099-1:2018 does not address waste water treatment systems.
The stan ...
https://sales.sfs.fi/julkaisu.html.stx?id=652950
ISO 21809-5:2017 specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline transportation systems for the petroleum and natural gas ...
https://sales.sfs.fi/julkaisu.html.stx?id=531512
ISO 8094:2013 specifies a test method for determining the adhesion strength of the cover to the core layer. It applies exclusively to steel cord conveyor belts.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in F ...
https://sales.sfs.fi/julkaisu.html.stx?id=230027
ISO 21809-2:2014 specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for ...
https://sales.sfs.fi/julkaisu.html.stx?id=309839
ISO 16809:2017 specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time of flight of ultrasonic pulses only.
The standards writing body responsible for this document in Finland is Mechanical Engineering ...
https://sales.sfs.fi/julkaisu.html.stx?id=780649
This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at the time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l.
It is applicable ...
https://sales.sfs.fi/julkaisu.html.stx?id=822687
This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l.
it is applicable to ...
https://sales.sfs.fi/julkaisu.html.stx?id=822736
This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l.
It is applicable to c ...
https://sales.sfs.fi/julkaisu.html.stx?id=821423
https://sales.sfs.fi/julkaisu.html.stx?id=878915
SFS-EN ISO 21809-3:en – Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 3: Field joint coatings (ISO 21809-3:2016)
Verkkokaupan tuotteet
SFS-EN ISO 8099-1:2018:en – Veneet. Jätejärjestelmät. Osa 1: Jäteveden keräily
Verkkokaupan tuotteet
SFS-EN ISO 21809-5:2017:en – Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 5: External concrete coatings (ISO 21809-5:2017)
Verkkokaupan tuotteet
SFS-EN ISO 8094:en – Steel cord conveyor belts. Adhesion strength test of the cover to the core layer (ISO 8094:2013)
Verkkokaupan tuotteet
SFS-EN ISO 21809-2:en – Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
Verkkokaupan tuotteet
SFS-EN ISO 16809:2019:en – Rikkomaton aineenkoetus. Paksuusmittaus ultraäänellä
Verkkokaupan tuotteet
SFS-EN ISO 9809-3:2019:en – Kaasupullot - Uudelleen täytettävien saumattomien teräksisten kaasupullojen ja putkiastioiden suunnittelu, valmistus ja testaus - Osa 3: Normalisoidusta teräksestä valmistetut pullot ja putkiastiat
Verkkokaupan tuotteet
SFS-EN ISO 9809-2:2019:en – Kaasupullot - Uudelleen täytettävien saumattomien teräksisten kaasupullojen ja putkiastioiden suunnittelu, valmistus ja testaus - Osa 2: Nuorrutusteräksestä valmistetut kaasupullot ja putkiastiat, joiden murtolujuus on suurempi tai yhtäsuuri kuin 1100 MPa
Verkkokaupan tuotteet
SFS-EN ISO 9809-1:2019:en – Kaasupullot - Uudelleen täytettävien saumattomien teräksisten kaasupullojen ja putkiastioiden suunnittelu, valmistus ja testaus - Osa 1: Nuorrutusteräksestä valmistetut kaasupullot ja putkiastiat, joiden murtolujuus on pienempi kuin 1100 MPa
Verkkokaupan tuotteet
SFS-EN ISO 21809-3:2016/A1:2020:en – Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 3: Field joint coatings. Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
Verkkokaupan tuotteet