Hakutulokset
Hakutulokset
Haulla "845" löytyi 123 tulosta.
ISO 845:2006 specifies a method for determining the apparent overall density and the apparent core density of cellular plastics and rubbers.
If the material to be tested includes skins formed during a moulding/extrusion, the apparent overall density or the apparent core density, or both, can be d ...
https://sales.sfs.fi/julkaisu.html.stx?id=133935
ISO 26845:2008 specifies apparatus, reagents, sampling, sample preparation, terms and definitions, basic procedures, loss on ignition and reporting of results applicable to the following standards, which are used for the chemical analysis of refractory products and raw materials by wet chemical, ...
https://sales.sfs.fi/julkaisu.html.stx?id=109901
ISO 13845:2015 specifies a method for testing the leak tightness under internal pressure with angular deflection of assembled joints between elastomeric-sealing-ring-type sockets made of plastic or metal and plastic pressure pipes.
The standards writing body responsible for this document in Fin ...
https://sales.sfs.fi/julkaisu.html.stx?id=353405
ISO/TS 17845:2004 gives a system for the designation of imperfections in welding and allied processes.
It applies to metallic and non-metallic materials (e.g. thermoplastics).
It can also be applied for other purposes (e.g. founding).
The standards writing body responsible for this document in ...
https://sales.sfs.fi/julkaisu.html.stx?id=54
https://sales.sfs.fi/julkaisu.html.stx?id=100018539
A test portion is dissolved in ethanol and the solution is acidified. The alkane monosulfonic acids are separated from the alkane disulfonates and sulfate ions by extraction with light petroleum. The light petroleum phase is evaporated and the residue is solved in ethanol. Traces of alkali are re ...
https://sales.sfs.fi/julkaisu.html.stx?id=14011
Establishes general principles for the simplified representation of holes, bolts (screws), rivets, etc. on technical drawings.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=13862
Työssä sattuvat tapaturmat ja työperäiset sairaudet ovat hankalia kaikille organisaatioille, mutta pienille yrityksille niiden kielteiset seuraukset saattavat olla ylitsepääsemättömät.
Tämä käsikirja, joka on laadittu ISOn ja UNIDOn yhteistyönä, auttaa myös pienehköjä yrityksiä ...
https://sales.sfs.fi/julkaisu.html.stx?id=933373
Työssä sattuvat tapaturmat ja työperäiset sairaudet ovat hankalia kaikille organisaatioille, mutta pienille yrityksille niiden kielteiset seuraukset saattavat olla ylitsepääsemättömät.
Tämä käsikirja, joka on laadittu ISOn ja UNIDOn yhteistyönä, auttaa myös pienehköjä yrityksiä ...
https://sales.sfs.fi/julkaisu.html.stx?id=933366
This document specifies the mapping between the semantic model of an electronic invoice, included in EN 16931-1 and the UBL 2.1 syntax (ISO/IEC 19845). For each element in the semantic model (including sub-elements or supplementary components such as Identification scheme identifiers) it is defin ...
https://sales.sfs.fi/julkaisu.html.stx?id=905240
SFS-EN ISO 845:en – Cellular plastics and rubbers. Determination of apparent density (ISO 845:2006)
Verkkokaupan tuotteet
SFS-EN ISO 26845:en – Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008)
Verkkokaupan tuotteet
SFS-EN ISO 13845:en – Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
Verkkokaupan tuotteet
CEN ISO/TS 17845:en – Welding and allied processes. Designation system for imperfections (ISO/TS 17845:2004)
Verkkokaupan tuotteet
SFS-EN ISO 845 – Cellular plastics and rubbers. Determination of apparent (bulk) density (ISO 845:1988)
Verkkokaupan tuotteet
SFS-EN ISO 6845:en – Surface active agents. Technical alkane sulfonates. Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
Verkkokaupan tuotteet
SFS-EN ISO 5845-1:en – Tekniset piirustukset. Kiinnittimiä sisältävien kokoonpanojen yksinkertaistettu esittäminen. Osa 1: Yleiset periaatteet
Verkkokaupan tuotteet
SFS-käsikirja 845:2020 – ISO 45001:2018 Työterveys- ja työturvallisuusjärjestelmät. Käytännön opas pk-yrityksille
Verkkokaupan tuotteet
SFS-eKirja 845:2020 – ISO 45001:2018 Työterveys- ja työturvallisuusjärjestelmät. Käytännön opas pk-yrityksille
Verkkokaupan tuotteet
CEN/TS 16931-3-2:2020:en – Electronic invoicing. Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note
Verkkokaupan tuotteet