Hakutulokset
Hakutulokset
Haulla "1012" löytyi 42 tulosta.
ISO 10121-1:2014 aims to provide an objective laboratory test method, a suggested apparatus, normative test sections and normative tests for evaluation of three different solid gas-phase air cleaning media (GPACM) or GPACM configurations for use in gas-phase air cleaning devices intended for gene ...
https://sales.sfs.fi/julkaisu.html.stx?id=248447
ISO 10121-2:2013 aims to provide an objective test method to estimate the performance of any full size gas filtration device (GPACD) for general filtration regardless of media or technique used in the device. In fact, the goal of this part of ISO 10121 is to avoid relating the test data to intern ...
https://sales.sfs.fi/julkaisu.html.stx?id=231225
ISO 41012:2017 provides guidance on sourcing and development of agreements in facility management (FM). It highlights:
· essential elements in FM sourcing processes;
· FM roles and responsibilities in sourcing processes;
· development processes and structures of typical agreement models.
ISO 4 ...
https://sales.sfs.fi/julkaisu.html.stx?id=685642
ISO 21012:2018 specifies design, construction, type and production testing, and marking requirements for non-insulated cryogenic flexible hoses used for the transfer of cryogenic fluids within the following range of operating conditions:
- working temperature: from -270 °C to +65 °C;
- nominal ...
https://sales.sfs.fi/julkaisu.html.stx?id=728704
This part of EN 1012 is applicable to compressors and compressor units having an operating pressure greater than 0,5 bar and designed to compress air, nitrogen or inert gases. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, o ...
https://sales.sfs.fi/julkaisu.html.stx?id=155498
ISO 10123:2013 specifies a method for the determination of the shear strength of anaerobic-curing liquid adhesives used for retaining cylindrical assemblies, pin-and-collar type, or for locking and sealing threaded fasteners. This test method can also be used for other adhesives.
The standards ...
https://sales.sfs.fi/julkaisu.html.stx?id=785848
This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part ...
https://sales.sfs.fi/julkaisu.html.stx?id=240442
This standard specifies the electrical characteristics of a U-weighting filter mainly for use with sound level meters meeting the requirements of IEC 651 for the measurement of audible sound in the presence of ultrasound.
The standards writing body responsible for this document in Finland is El ...
https://sales.sfs.fi/julkaisu.html.stx?id=337268
This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum ...
https://sales.sfs.fi/julkaisu.html.stx?id=135954
https://sales.sfs.fi/julkaisu.html.stx?id=100013084
SFS-EN ISO 10121-1:en – Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Part 1: Gas-phase air cleaning media (ISO 10121-1:2014)
Verkkokaupan tuotteet
SFS-EN ISO 10121-2:en – Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Part 2: Gas-phase air cleaning devices (GPACD) (ISO 10121-2:2013)
Verkkokaupan tuotteet
SFS-EN ISO 41012:2018:en – Tilajohtaminen. Ohjeita strategiseen hankintaan ja sopimusten kehittämiseen
Verkkokaupan tuotteet
SFS-EN ISO 21012:2018:en – Kryogeeniset säiliöt. Letkut
Verkkokaupan tuotteet
SFS-EN 1012-1:en – Kompressorit ja tyhjöpumput. Turvallisuusvaatimukset. Osa 1: Kompressorit
Verkkokaupan tuotteet
SFS-EN ISO 10123:2019:en – Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
Verkkokaupan tuotteet
SFS-EN 1012-3:en – Kompressorit ja tyhjöpumput. Turvallisuusvaatimukset. Osa 3: Prosessikompressorit
Verkkokaupan tuotteet
SFS-EN 61012:en – Filters for the measurement of audible sound in the presence of ultrasound
Verkkokaupan tuotteet
SFS-EN 1012-2 + A1:en – Kompressorit ja tyhjöpumput. Turvallisuusvaatimukset. Osa 2: Tyhjöpumput
Verkkokaupan tuotteet
SFS-EN 1012-2 – Kompressorit ja tyhjöpumput. Turvallisuusvaatimukset. Osa 2: Tyhjöpumput
Verkkokaupan tuotteet