Siirry sisältöön

Hakutulokset

Hakutulokset

Haulla "125" löytyi 516 tulosta.

SFS-EN 61834-3:en – Recording – Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) – Part 3: HD format for 1125-60 and 1250-50 systems

Verkkokaupan tuotteet
The main object of this part of EN 61834 is to establish basic principles applicable to the next generation of digital video cassette recording systems for consumer use for the interest of both users and manufacturers. It specifies the content, format and recording method of the data blocks formi ...
https://sales.sfs.fi/julkaisu.html.stx?id=340017

SFS-EN ISO 9241-125:2017:en – Ergonomics of human-system interaction. Part 125: Guidance on visual presentation of information (ISO 9241-125:2017)

Verkkokaupan tuotteet
ISO 9241-125:2017 provides guidance for the visual presentation of information controlled by software, irrespective of the device. It includes specific properties such as the syntactic or semantic aspects of information, e.g. coding techniques, and gives provisions for the organization of informa ...
https://sales.sfs.fi/julkaisu.html.stx?id=568606

SFS-EN ISO 11125-1:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1: Sampling (ISO 11125-1:2018)

Verkkokaupan tuotteet
This document specifies a method for the sampling of metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in other parts of ISO 11125. This is one of a number of parts of ISO 11125 ...
https://sales.sfs.fi/julkaisu.html.stx?id=716749

SFS-EN 12560-7:en – Flanges and their joints. Gaskets for Class-designated flanges. Part 7: Covered metal jacketed gaskets for use with steel flanges

Verkkokaupan tuotteet
This European Standard specifies the construction, dimensions and marking of covered serrated metal jacketed gaskets for use with flanges complying with prEN 1759 1 for Class 150, Class 300, Class 600, Class 900. Class 1 500 for sizes up to and including NPS 24, and for Class designation 2 500 up ...
https://sales.sfs.fi/julkaisu.html.stx?id=4878

SFS-EN 12560-6:en – Flanges and their joints. Gaskets for Class-designated flanges. Part 6: Covered serrated metal gaskets for use with steel flanges

Verkkokaupan tuotteet
This European Standard specifies the construction, dimensions and marking of covered serrated metal gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900, Class 1500 and Class 2500 up to and including NPS 24. This document does not extend to serra ...
https://sales.sfs.fi/julkaisu.html.stx?id=4877

SFS-EN 12560-2:en – Flanges and their joints. Dimensions of gaskets for Class-designated flanges. Part 2: Spiral wound gaskets for use with steel flanges

Verkkokaupan tuotteet
This European Standard specifies the dimensions, design, types, designation, materials and marking of spiral wound gaskets for use with type A flat face or type B raised face flange facings complying with EN 1759-1 for the following Class designations: - Class 150, to Class 1 500 for nominal siz ...
https://sales.sfs.fi/julkaisu.html.stx?id=238856

SFS-EN ISO 12569:2017:en – Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method (ISO 12569:2017)

Verkkokaupan tuotteet
ISO 12569:2017 establishes methods to obtain the ventilation rate or specific airflow rate in a building space (which is considered to be a single zone) using a tracer gas. The measurement methods apply for spaces where the combined conditions concerning the uniformity of tracer gas concentration ...
https://sales.sfs.fi/julkaisu.html.stx?id=544822

SFS-EN ISO 11125-7:2018:en – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 7: Determination of moisture (ISO 11125-7:2018)

Verkkokaupan tuotteet
This document specifies a test method for the determination of the level of free moisture present in metallic blast-cleaning abrasives. It is determined by measuring the mass lost on heating. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives ...
https://sales.sfs.fi/julkaisu.html.stx?id=716752