Hakutulokset
Hakutulokset
Haulla "126" löytyi 476 tulosta.
ISO 12679:2011 includes general guidelines for the workmanlike production of metallic, metal-ceramic, oxide-ceramic and plastic coatings, by means of thermal spraying on metallic and non-metallic parent materials.
ISO 12679:2011 provides recommendations for an appropriate and practical spray set- ...
https://sales.sfs.fi/julkaisu.html.stx?id=395302
This document specifies only the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126-1, ISO 4126-4 and ISO 4126-5, and bursting disc safety devices, according to ISO 4126-2, installed upstr ...
https://sales.sfs.fi/julkaisu.html.stx?id=933265
https://sales.sfs.fi/julkaisu.html.stx?id=997986
ISO 4126-7:2013 specifies requirements for safety valves. It contains information which is common to ISO 4126-1 to ISO 4126-6 to avoid unnecessary repetition.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Fi ...
https://sales.sfs.fi/julkaisu.html.stx?id=235600
ISO 12677:2011 specifies a method for the chemical analysis of refractory and technical ceramic raw materials, intermediates and products, by means of the X-ray fluorescence (XRF) fused cast-bead method. Typical materials that can be analysed by ISO 12677:2011 are given in Clause 3. ISO 12677:201 ...
https://sales.sfs.fi/julkaisu.html.stx?id=177800
ISO 12625-9:2015 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.
Currently, two types of clamping devices are available on the market with two different diameters, one is with 50 mm and ...
https://sales.sfs.fi/julkaisu.html.stx?id=353403
ISO 12625-16:2015 specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing.
ISO 12625-16:2015 contains specific instructions for the preparation of test pieces of single-ply and multi-ply pro ...
https://sales.sfs.fi/julkaisu.html.stx?id=353401
ISO 11126-10:2017 specifies requirements for almandite garnet abrasives, as supplied for blast-cleaning. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified ...
https://sales.sfs.fi/julkaisu.html.stx?id=631339
This European Standard specifies the requirements and test methods for durability and strength of hardware for vertical and horizontal pivot windows and door height windows (including pivot hinges and central locking systems).
If the hardware manufacturer would like to classify an integrated rest ...
https://sales.sfs.fi/julkaisu.html.stx?id=230903
https://sales.sfs.fi/julkaisu.html.stx?id=997939
SFS-EN ISO 12679:en – Terminen ruiskutus. Suosituksia termiseen ruiskutukseen
Verkkokaupan tuotteet
SFS-EN ISO 4126-3:2020:en – Safety devices for protection against excessive pressure. Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
Verkkokaupan tuotteet
SFS-EN 1264-2:2021:en – Water based surface embedded heating and cooling systems. Part 2: Floor heating: Methods for the determination of the thermal output using calculations and experimental tests
Verkkokaupan tuotteet
SFS-EN ISO 4126-7:en – Ylipaineen varolaitteet. Osa 7: Yleiset tiedot
Verkkokaupan tuotteet
SFS-EN ISO 12677:en – Chemical analysis of refractory products by X-ray fluorescence (XRF). Fused cast-bead method (ISO 12677:2011)
Verkkokaupan tuotteet
SFS-EN ISO 12625-9:en – Tissue paper and tissue products. Part 9: Determination of ball burst strength (ISO 12625-9:2015)
Verkkokaupan tuotteet
SFS-EN ISO 12625-16:en – Tissue paper and tissue products. Part 16: Determination of optical properties. Opacity (paper backing). Diffuse reflectance method (ISO 12625-16:2015)
Verkkokaupan tuotteet
SFS-EN ISO 11126-10:2017:en – Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 10: Almandite garnet (ISO 11126-10:2017)
Verkkokaupan tuotteet
SFS-EN 13126-9:en – Lukot ja rakennushelat. Ikkunoiden ja ovien korkuisten ikkunoiden vaatimukset ja testausmenetelmät. Osa 9: Horisontaalisten ja vertikaalien pivot ikkunoiden rakennushelat
Verkkokaupan tuotteet
SFS-EN 1264-5:2021:en – Water based surface embedded heating and cooling systems. Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
Verkkokaupan tuotteet