Siirry sisältöön

Hakutulokset

Hakutulokset

Haulla "128" löytyi 352 tulosta.

CEN/TR 12831-2:2017:en – Rakennusten lämmitys- ja vesipohjaiset jäähdytysjärjestelmät. Lämmitystarpeen laskenta. Osa 2: EN 12831-1 täydentävä TR (sisätilan lämmityskuorma)

Verkkokaupan tuotteet
This Technical Report refers to standard FprEN 12831, module M3-3 (FprEN 12831-1). It contains information to support the correct understanding, use and national adaptation of standard FprEN 12831-1. The standards writing body responsible for this document in Finland is Mechanical Engineering a ...
https://sales.sfs.fi/julkaisu.html.stx?id=485932

SFS-EN ISO 12846:en – Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)

Verkkokaupan tuotteet
ISO 12846:2012 specifies two methods for the determination of mercury in drinking, surface, ground, rain and waste water after appropriate pre-digestion. For the first method, an enrichment step by amalgamation of the Hg on, for example, a gold/platinum adsorber is used. For the second method, th ...
https://sales.sfs.fi/julkaisu.html.stx?id=187964

CEN/TR 12831-4:2017:en – Rakennusten lämmitys- ja vesipohjaiset jäähdytysjärjestelmät. Lämmitystarpeen laskenta. Osa 4: EN 12831-3 täydentävä TR (Lämpimän käyttöveden energiantarpeen määrittäminen)

Verkkokaupan tuotteet
This technical report refers to standard EN 12831-3, module M8-2, M8-3. It contains information to support the correct understanding, use and national adaptation of standard FprEN 12831-3. The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals ...
https://sales.sfs.fi/julkaisu.html.stx?id=491588

SFS-EN ISO 12836:en – Hammaslääketiede. CAD/CAM-järjestelmissä käytettävät digitointilaitteet. Testimenetelmät tarkkuuden ja täsmällisyyden arvioimiseksi

Verkkokaupan tuotteet
ISO 12836:2015 specifies test methods for the assessment of the accuracy of digitizing devices for computer-aided design/computer-aided manufacturing (CAD/CAM) systems for indirect dental restorations. The methods described in ISO 12836:2015 require a digitizing device in which the object is moun ...
https://sales.sfs.fi/julkaisu.html.stx?id=384780