Hakutulokset
Hakutulokset
Haulla "137" löytyi 419 tulosta.
ISO 11137-1:2006 specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of ISO 11137-1:2006 is limited to medical devices, it specifies requirements and provides guidance that may be applicable to oth ...
https://sales.sfs.fi/julkaisu.html.stx?id=384704
ISO 13786:2017 specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depe ...
https://sales.sfs.fi/julkaisu.html.stx?id=527194
ISO 13766-2:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as classified in ISO/TR 12603:2010:
- drilling and foundation e ...
https://sales.sfs.fi/julkaisu.html.stx?id=678813
ISO 13766-1:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as defined in ISO/TR 12603:2010:
- drilling and foundation equi ...
https://sales.sfs.fi/julkaisu.html.stx?id=678810
ISO 13789:2017 specifies a method and provides conventions for the calculation of the steady-state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings. It is applicable both to heat loss (internal temperature higher than external temperature) and to h ...
https://sales.sfs.fi/julkaisu.html.stx?id=525910
ISO 11137-3:2017 gives guidance on meeting the requirements in ISO 11137-1 and ISO 11137-2 and in ISO/TS 13004 relating to dosimetry and its use in development, validation and routine control of a radiation sterilization process.
The standards writing body responsible for this document in Finla ...
https://sales.sfs.fi/julkaisu.html.stx?id=528020
This part of ISO 11137 specifies methods for determining the minimum dose needed to achieve a specified requirement for sterility and methods to substantiate the use of 25 kGy or 15 kGy as the sterilization dose to achieve a sterility assurance level, SAL, of 10-6. This part of ISO 11137 also ...
https://sales.sfs.fi/julkaisu.html.stx?id=384680
Standardin ISO 13732 tässä osassa esitetään lämpötilan kynnysarvot palovammoille, joita syntyy ihmisen ihon joutuessa kosketukseen kuuman kiinteän pinnan kanssa.
Siinä kuvaillaan myös menetelmiä, joiden avulla voidaan arvioida palovammariskejä, jos ihmiset voivat tai saattavat kosketta ...
https://sales.sfs.fi/julkaisu.html.stx?id=198691
ISO 13706:2011 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries.
ISO 13706:2011 is applicable to air-cooled heat exchange ...
https://sales.sfs.fi/julkaisu.html.stx?id=183417
ISO 16137:2006 specifies requirements for the design, functional characteristics and manufacture of check valves made of thermoplastics materials intended to allow the flow of liquid fluids through the valve in one direction only and to prevent backflow, their connection to the pipe system, the b ...
https://sales.sfs.fi/julkaisu.html.stx?id=12901
SFS-EN ISO 11137-1:en – Sterilization of health care products. Radiation. Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)
Verkkokaupan tuotteet
SFS-EN ISO 13786:2017:en – Rakennusosien lämpöominaisuudet. Dynaamiset lämpöominaisuudet. Laskentamenetelmät
Verkkokaupan tuotteet
SFS-EN ISO 13766-2:2018:en – Maansiirto- ja rakennuskoneet. Sisäisellä sähköisellä teholähteellä varustettujen koneiden sähkömagneettinen yhteensopivuus (EMC). Osa 2: EMC-lisävaatimukset toiminnallisen turvallisuuden kannalta
Verkkokaupan tuotteet
SFS-EN ISO 13766-1:2018:en – Maansiirto- ja rakennuskoneet. Sähkömagneettinen yhteensopivuus (EMC). Osa 1: Yleiset EMC-vaatimukset tyypillisissä sähkömagneettisissa ympäristöolosuhteissa
Verkkokaupan tuotteet
SFS-EN ISO 13789:2017:en – Rakennusten lämpöominaisuudet. Lämmönsiirron ja ilmanvaihdon lämpöhäviökertoimet
Verkkokaupan tuotteet
SFS-EN ISO 11137-3:2017:en – Terveydenhuollon laitteiden ja tarvikkeiden sterilointi. Säteily. Osa 3: Ohjeita säteilyannoksen kehittelyyn, validointiin ja rutiininomaiseen valvontaan
Verkkokaupan tuotteet
SFS-EN ISO 11137-2:en – Sterilization of health care products. Radiation. Part 2: Establishing the sterilization dose (ISO 11137-2:2013)
Verkkokaupan tuotteet
SFS-EN ISO 13732-1:en – Lämpöolojen ergonomia. Arviointimenetelmät pintoihin koskettamisen vaikutuksista ihmiseen. Osa 1: Kuumat pinnat
Verkkokaupan tuotteet
SFS-EN ISO 13706:en – Öljy-, petrokemiallinen- ja maakaasuteollisuus. Ilmajäähdytteiset lämmönvaihtimet (ISO 13706:2011)
Verkkokaupan tuotteet
SFS-EN ISO 16137:en – Teollisuusventtiilit. Kestomuoviset yksisuuntaventtiilit
Verkkokaupan tuotteet