Hakutulokset
Hakutulokset
Haulla "165" löytyi 310 tulosta.
ISO 16558-1:2015 specifies a method for the quantitative determination of the total extractable volatile, the volatile aliphatic, and aromatic fractions of petroleum hydrocarbon content in field moist soil samples by gas chromatography with mass spectrometric detection. The aromatic fractions are ...
https://sales.sfs.fi/julkaisu.html.stx?id=390045
ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including ...
https://sales.sfs.fi/julkaisu.html.stx?id=12933
ISO 16530-1:2017 is applicable to all wells that are operated by the petroleum and natural gas industry. This document is applicable to any well, or group of wells, regardless of their age, location (including onshore, subsea and offshore wells) or type (e.g. naturally flowing, artificial lift, i ...
https://sales.sfs.fi/julkaisu.html.stx?id=480386
This standard defines the coupling system keyway for plug used in the family of rectangular electrical connectors.
The connector plugs corresponding to those coupling system keyways are defined in EN 4165-006, EN 4165-007, EN 4165-008 and EN 4165-009 and EN 4165-010.
The standards writing body ...
https://sales.sfs.fi/julkaisu.html.stx?id=924743
ISO/TS 16558-2:2015 specifies a method for the quantitative determination of the total extractable semi-volatile, aliphatic, and aromatic fractions of petroleum hydrocarbon content in field moist soil samples by gas chromatography.
The results of the test carried out can be used for risk assessme ...
https://sales.sfs.fi/julkaisu.html.stx?id=392382
ISO 16591:2010 specifies a method for the determination of the sulfur content by oxidative microcoulometry of petroleum light and middle distillates with a final boiling point not higher than 400 °C. It is applicable to materials with sulfur contents in the range of 1 mg/kg to 100 mg/kg.
The ...
https://sales.sfs.fi/julkaisu.html.stx?id=171512
ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and includ ...
https://sales.sfs.fi/julkaisu.html.stx?id=12932
ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up t ...
https://sales.sfs.fi/julkaisu.html.stx?id=12931
ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to ...
https://sales.sfs.fi/julkaisu.html.stx?id=12930
ISO 16526-3:2011 specifies the test method for a non-invasive measurement of X-ray tube voltages using the energy spectrum of X-rays (spectrometric method). It covers the voltage range from 10 kV to 500 kV.
The intention is to check the correspondence of the actual voltage with the indicated valu ...
https://sales.sfs.fi/julkaisu.html.stx?id=865884
SFS-EN ISO 16558-1:en – Soil quality. Risk-based petroleum hydrocarbons. Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) (ISO 16558-1:2015)
Verkkokaupan tuotteet
SFS-EN ISO 16585:en – Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)
Verkkokaupan tuotteet
SFS-EN ISO 16530-1:2017:en – Petroleum and natural gas industries. Well integrity. Part 1: Life cycle governance (ISO 16530-1:2017)
Verkkokaupan tuotteet
SFS-EN 4165-021 – Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Part 021: Coupling system keyway for plug. Product standard
Verkkokaupan tuotteet
CEN ISO/TS 16558-2:en – Soil quality. Risk-based petroleum hydrocarbons. Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015)
Verkkokaupan tuotteet
SFS-EN ISO 16591:en – Öljytuotteet. Rikkipitoisuuden määrittäminen mikrokulometrisellä menetelmällä
Verkkokaupan tuotteet
SFS-EN ISO 16584:en – Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt (ISO 16584:2002)
Verkkokaupan tuotteet
SFS-EN ISO 16583:en – Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
Verkkokaupan tuotteet
SFS-EN ISO 16582:en – Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
Verkkokaupan tuotteet
SFS-EN ISO 16526-3:2020:en – Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Part 3: Spectrometric method (ISO 16526-3:2011)
Verkkokaupan tuotteet