Hakutulokset
Hakutulokset
Haulla "216" löytyi 161 tulosta.
ISO/TS 21623:2017 describes a systematic approach to assess potential occupational risks related to nano-objects and their agglomerates and aggregates (NOAA) arising from the production and use of nanomaterials and/or nano-enabled products. This approach provides guidance to identify exposure rou ...
https://sales.sfs.fi/julkaisu.html.stx?id=647607
ISO 21671:2006 specifies the dimensions and other requirements for the most commonly used polishers which are used at the working place of the dentist and/or in the dental laboratory.
ISO 21671:2006 is applicable to unmounted and mounted polishers.
The standards writing body responsible for thi ...
https://sales.sfs.fi/julkaisu.html.stx?id=13261
ISO 21670:2014 specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) or d = 8 mm to 16 mm (fine pitch thread), of product grade A. Weld nuts conforming to ISO 21670:2014 are suitable for use with bolts of property classes up to 10.9 according to ISO 898 ...
https://sales.sfs.fi/julkaisu.html.stx?id=290705
ISO 216:2007 specifies the trimmed sizes of writing paper and certain classes of printed matter.
It applies to trimmed sizes of paper for administrative, commercial and technical use, and also to certain classes of printed matter, such as forms, catalogues, etc.
It does not necessarily apply to n ...
https://sales.sfs.fi/julkaisu.html.stx?id=41959
IEC 60216-5 specifies the experimental and calculation procedures to be used for deriving the relative thermal endurance index of a material from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2. The calculation procedures are supplementary to those of ...
https://sales.sfs.fi/julkaisu.html.stx?id=100129292
The standards writing body responsible for this document in Finland is Electrotechnical Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=821334
https://sales.sfs.fi/julkaisu.html.stx?id=979436
ISO 21672-2:2012 specifies the designation of periodontal probes.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=222555
1 Scope
This part of ISO 21672 specifies general requirements and test methods for periodontal probes.
It is applicable to periodontal probes made of austenitic and martensitic stainless steel.
It is not applicable to periodontal probes with working ends made completely of plastics, nor to HAUER ...
https://sales.sfs.fi/julkaisu.html.stx?id=195439
ISO 21627-3:2009 specifies a method for the determination of the total amount of chlorine in epoxy resins.
The chlorine measured by this method, referred to as total chlorine, includes saponifiable organic chlorine and inorganic chlorine.
The standards writing body responsible for this document ...
https://sales.sfs.fi/julkaisu.html.stx?id=138884
CEN ISO/TS 21623:2018:en – Työperäinen altistuminen. Nanokappaleiden ja niiden agglomeraattien ja aggregaattien (NOAA) ihon kautta tapahtuvan altistumisen arviointi.
Verkkokaupan tuotteet
SFS-EN ISO 21671:en – Hammaslääketiede. Kiillotusaineet.
Verkkokaupan tuotteet
SFS-EN ISO 21670:en – Fasteners. Hexagon weld nuts with flange (ISO 21670:2014)
Verkkokaupan tuotteet
SFS-EN ISO 216:en – Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction (ISO 216:2007)
Verkkokaupan tuotteet
SFS-EN 60216-5:en – Electrical insulating materials – Thermal endurance properties – Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
Verkkokaupan tuotteet
SFS-EN IEC 60684-3-216:2019:en – Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
Verkkokaupan tuotteet
SFS-EN ISO 21660-3:2021:en – Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
Verkkokaupan tuotteet
SFS-EN ISO 21672-2:en – Hammaslääketiede. Ientaskun mittauksessa käytettävät käsi-instrumentit. Osa 2: Merkintä
Verkkokaupan tuotteet
SFS-EN ISO 21672-1:en – Hammaslääketiede. Ientaskun mittauksessa käytettävät käsi-instrumentit. Osa 1: Yleiset vaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 21627-3:en – Plastics. Epoxy resins. Determination of chlorine content. Part 3: Total chlorine (ISO 21627-3:2009)
Verkkokaupan tuotteet