Hakutulokset
Hakutulokset
Haulla "217" löytyi 153 tulosta.
ISO 12217-3:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed.
The evaluation of stability and buoyancy properties using ISO 12217-3:2015 will enable the boat to be ...
https://sales.sfs.fi/julkaisu.html.stx?id=533909
ISO 12217-2:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.
The evaluation of stability and buoyancy properties using ISO 12217-2:2015 will enable the boat to be ...
https://sales.sfs.fi/julkaisu.html.stx?id=547395
ISO 12217-1:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.
The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat ...
https://sales.sfs.fi/julkaisu.html.stx?id=547391
ISO 21787:2006 specifies requirements for the design, functional characteristics and manufacture of globe valves made of thermoplastics materials intended for isolating and control service, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 d ...
https://sales.sfs.fi/julkaisu.html.stx?id=13264
ISO 2178:2016 specifies a method for non-destructive measurements of the thickness of non-magnetizable coatings on magnetizable base metals.
The measurements are tactile and non-destructive on typical coatings. The probe or an instrument with integrated probe is placed directly on the coating to ...
https://sales.sfs.fi/julkaisu.html.stx?id=408070
ISO 217:2013 specifies a primary range and a supplementary range of untrimmed sizes of paper in sheets which are to be trimmed to sizes as given in ISO 216 and establishes a system of designation of untrimmed sizes.
ISO 217:2013 also specifies the method for the indication of machine direction of ...
https://sales.sfs.fi/julkaisu.html.stx?id=235586
This second edition cancels and replaces the first edition (i. e. ISO 2179:1972). Specifies requirements for electroplated coatings of the intermetallic compound SnNi, with a composition of approximately 65 % (m/m) tin and 35 % (m/m) nickel. It does not apply to threaded components, coatings on c ...
https://sales.sfs.fi/julkaisu.html.stx?id=410494
1 Soveltamisala
Tässä standardissa esitetään metallisen pinnoitteen sähkömäärää mittaava (coulometrinen) anodiseen liuotukseen perustuva paksuuden mittausmenetelmä. Se soveltuu vain sähköä johtaville pinnoitteille.
Taulukossa 1 on lueteltu tyypillisiä pinnoite- ja perusaineyhdistel ...
https://sales.sfs.fi/julkaisu.html.stx?id=198658
ISO/TS 21719-1:2018 describes:
- an overall description of the EFC personalization process;
- a description of EFC functionality that can be used for personalization.
The personalization process takes place within the domain of the entity that is responsible for the application in the OBE.
The ...
https://sales.sfs.fi/julkaisu.html.stx?id=648306
The standards writing body responsible for this document in Finland is Electrotechnical Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=675246
SFS-EN ISO 12217-3:2017:en – Veneet. Vakauden ja kelluvuuden arviointi ja luokittelu. Osa 3: Runkopituudeltaan alle 6 m veneet
Verkkokaupan tuotteet
SFS-EN ISO 12217-2:2017:en – Veneet. Vakauden ja kelluvuuden arviointi ja luokittelu. Osa 2: Runkopituudeltaan 6 m tai suuremmat purjeveneet
Verkkokaupan tuotteet
SFS-EN ISO 12217-1:2017:en – Veneet. Vakauden ja kelluvuuden arviointi ja luokittelu. Osa 1: Runkopituudeltaan 6 m tai suuremmat ei-purjeilla kulkevat veneet
Verkkokaupan tuotteet
SFS-EN ISO 21787:en – Teollisuusventtiilit. Kestomuoviset istukkaventtiilit
Verkkokaupan tuotteet
SFS-EN ISO 2178:en – Magneettisten perusaineiden epämagneettiset pinnoitteet. Paksuuden mittaus. Magneettinen menetelmä
Verkkokaupan tuotteet
SFS-EN ISO 217:en – Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)
Verkkokaupan tuotteet
SFS-EN ISO 2179:en – Electroplated coatings of tin-nickel alloy. Specification and test methods (ISO 2179:1986)
Verkkokaupan tuotteet
SFS-EN ISO 2177:en – Metalliset pinnoitteet. Pinnoitteen paksuuden mittaus. Sähkömäärää mittaava anodinen liuotusmenetelmä
Verkkokaupan tuotteet
CEN ISO/TS 21719-1:2018:en – Sähköinen maksunkeräys. Ajoneuvon laitteiden personointi. Osa 1: Taustarakenne
Verkkokaupan tuotteet
SFS-EN IEC 62386-217:2018:en – Digital addressable lighting interface – Part 217: Particular requirements for control gear – Thermal gear protection (device type 16)
Verkkokaupan tuotteet