Hakutulokset
Hakutulokset
Haulla "263" löytyi 111 tulosta.
ISO 5263-2:2004 specifies an apparatus and the procedures for the laboratory-wet disintegration of mechanical pulps that do not exhibit latency or pulps where latency has already been removed. This apparatus and procedure are required for preparation of the test portion in a number of other Inter ...
https://sales.sfs.fi/julkaisu.html.stx?id=13788
1.1 This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a) non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b) non alloy and alloy steels fo ...
https://sales.sfs.fi/julkaisu.html.stx?id=622081
ISO 4263-3:2015 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDU, HEES, HEPG and HETG as defined, for example, in ISO 12922[1] and ISO 15380[2]. The ageing is accelerated by the presence of oxygen and metal catalysts at elevated tem ...
https://sales.sfs.fi/julkaisu.html.stx?id=398791
ISO 4263-2:2003 specifies a method for the determination of the ageing behaviour of hydraulic fluids of category HFC as defined in ISO 6743-4 and specified in ISO 12922. The ageing is accelerated by the presence of oxygen, water and metal catalysts at elevated temperature, and the degradation of ...
https://sales.sfs.fi/julkaisu.html.stx?id=13658
This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using a B-flute geometry.
The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.
NOTE ISO ...
https://sales.sfs.fi/julkaisu.html.stx?id=735234
This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using an A-flute geometry.
The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.
NOTE IS ...
https://sales.sfs.fi/julkaisu.html.stx?id=739635
ISO 5263-1:2004 specifies an apparatus and the procedure for the laboratory-wet disintegration of chemical pulps. This apparatus and procedure are required for preparation of the test portion in a number of other International Standards dealing with pulps.
In principle, this method is applicable ...
https://sales.sfs.fi/julkaisu.html.stx?id=13787
ISO 4263:2006 specifies a method for the determination of the ageing behaviour of gear oils of categories CKC, CKD, CKS and CKT as defined in ISO 6743-6. The ageing is accelerated by the presence of air and elevated temperatures, and the degradation of the oil is assessed by the change in kinemat ...
https://sales.sfs.fi/julkaisu.html.stx?id=13660
ISO 4263-1:2003 specifies a method for the determination of the ageing behaviour of rust- and oxidation- inhibited mineral oils having a density less than that of water, used as turbine oils (categories TSA, TGA, TSE, TGE of ISO 6743-5, hydraulic oils (categories HL, HM, HR, HV, HG of ISO 6743-4) ...
https://sales.sfs.fi/julkaisu.html.stx?id=13657
ISO 26304:2017 specifies requirements for classification of solid wire electrodes, tubular cored electrodes, and electrode-flux combinations (the all-weld metal deposits) in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of high strength steels with ...
https://sales.sfs.fi/julkaisu.html.stx?id=647568
SFS-EN ISO 5263-2:en – Pulps. Laboratory wet disintegration. Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
Verkkokaupan tuotteet
SFS-EN 10263-1:2017:en – Kylmätyssäys- ja kylmämuovausteräkset. Valssilangat, tangot ja langat. Osa 1: Yleiset tekniset toimitusehdot
Verkkokaupan tuotteet
SFS-EN ISO 4263-3:en – Öljytuotteet ja niiden johdannaiset. Lisäaineistettujen öljyjen ikääntymisen määrittäminen käyttäen TOST-testiä. Osa 3: Vedetön menetelmä synteettisille hydrauliöljyille
Verkkokaupan tuotteet
SFS-EN ISO 4263-2:en – Öljytuotteet ja niiden johdannaiset. Voiteluöljyjen ja -nesteiden vanhenemiskäyttäytymisen määritys. TOST testi. Osa 2: Luokan HFC hydrauliset nesteet
Verkkokaupan tuotteet
SFS-EN ISO 7263-2:2019:en – Corrugating medium. Determination of the flat crush resistance after laboratory fluting. Part 2: B-flute (ISO 7263-2:2018)
Verkkokaupan tuotteet
SFS-EN ISO 7263-1:2019:en – Corrugating medium. Determination of the flat crush resistance after laboratory fluting. Part 1: A-flute (ISO 7263-1:2019)
Verkkokaupan tuotteet
SFS-EN ISO 5263-1:en – Pulps. Laboratory wet disintegration. Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
Verkkokaupan tuotteet
SFS-EN ISO 4263-4:en – Öljytuotteet ja niiden johdannaiset. Lisäaineistettujen öljyjen ja nesteiden ikääntymisen määrittäminen. TOST-testi. Osa 4: Menetelmä teollisuusvaihteistoöljyille
Verkkokaupan tuotteet
SFS-EN ISO 4263-1:en – Öljytuotteet ja niiden johdannaiset. Lisäaineistettujen öljyjen ja polttoaineiden ikääntymisen määrittäminen. TOST-testi. Osa 1: Menetelmä mineraaliöljyille
Verkkokaupan tuotteet
SFS-EN ISO 26304:2018:en – Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification (ISO 26304:2017)
Verkkokaupan tuotteet