Hakutulokset
Hakutulokset
Haulla "265" löytyi 101 tulosta.
ISO 18265:2013 specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the use of the conversion tables.
The conversion tables in Annexes A to G apply to unalloyed and low all ...
https://sales.sfs.fi/julkaisu.html.stx?id=239922
ISO 15265:2004 describes a strategy for assessing and interpreting the risk of physiological constraints, or of discomfort, while working in a given climatic environment.
It is applicable in any working situation with steady or varying conditions of the climate, metabolic rate or clothing.
ISO 15 ...
https://sales.sfs.fi/julkaisu.html.stx?id=12687
ISO 16265:2009 specifies a procedure for the determination of the methylene blue active substances (MBAS) index, in the ranges 0,05 mg/l to 0,5 mg/l and 0,5 mg/l to 5,0 mg/l, in various water samples (e.g. ground water, drinking water, surface water, waste water and leachates). Anionic surfactant ...
https://sales.sfs.fi/julkaisu.html.stx?id=183796
ISO 1265:2007 specifies a method for determining the number of impurities and foreign particles in a flattened surface of poly(vinyl chloride) resin. It is not applicable to paste resins because of their finely divided state.
The standards writing body responsible for this document in Finland i ...
https://sales.sfs.fi/julkaisu.html.stx?id=12124
https://sales.sfs.fi/julkaisu.html.stx?id=100018559
This Standard specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.
The method is aimed to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking o ...
https://sales.sfs.fi/julkaisu.html.stx?id=938817
This standard, SFS 1265-1 specifies general requirements for uncoated high tensile strength steel products, which are widely used for the prestressing of concrete and are also used for other tensile applications in the construction field. The standard applies only to products as supplied by the p ...
https://sales.sfs.fi/julkaisu.html.stx?id=332682
Tässä kansainvälisessä standardissa määritellään periaatteet kovuusarvojen muuntamiseksi toisten kovuusasteikkojen arvoiksi sekä murtolujuuden arvioimiseksi. Standardissa esitetään myös yleistietoja muunnostaulukoiden käytöstä.
Liitteissä A–G esitetyt muunnostaulukot koskevat
†...
https://sales.sfs.fi/julkaisu.html.stx?id=247864
This International Standard is the entry point of the whole suite of International Standards for software and systems product line engineering and management. The scope of this International Standard is to This International Standard does not describe any methods and tools associated with softwar ...
https://sales.sfs.fi/julkaisu.html.stx?id=914524
The standards writing body responsible for this document in Finland is Electrotechnical Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=698903
SFS-EN ISO 18265:en – Metallien kovuusarvojen muuntaminen
Verkkokaupan tuotteet
SFS-EN ISO 15265:en – Lämpöolojen ergonomia. Riskin arvioinnin strategia työskentelyolosuhteisiin liittyvän lämpökuormituksen tai lämpötilasta johtuvan epämukavuuden torjumiseksi
Verkkokaupan tuotteet
SFS-EN ISO 16265:en – Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA) (ISO 16265:2009)
Verkkokaupan tuotteet
SFS-EN ISO 1265:en – Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles (ISO 1265:2007)
Verkkokaupan tuotteet
SFS-EN ISO 1265 – Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles (ISO 1265:1979)
Verkkokaupan tuotteet
SFS-EN ISO 24265:2020:en – Footwear. Test methods for uppers. Resistance to rubbing using a rubber strip (ISO 24265:2020)
Verkkokaupan tuotteet
SFS 1265-1:en – Jänneteräkset. Osa 1: Yleiset vaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 18265 – Metallien kovuusarvojen muuntaminen
Verkkokaupan tuotteet
SFS-ISO/IEC 26550:2020:en – Software and systems engineering — Reference model for product line engineering and management
Verkkokaupan tuotteet
SFS-EN IEC 61265:2018:en – Electroacoustics – Instruments for measurement of aircraft noise – Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
Verkkokaupan tuotteet