Siirry sisältöön
Suomi English

Hakutulokset

Hakutulokset

Näytä suodattimet Piilota suodattimet
Haulla "294" löytyi 141 tulosta.

SFS-EN ISO 29463-2:2018:en – High-efficiency filters and filter media for removing particles in air. Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)

Verkkokaupan tuotteet
ISO 29463-2:2011 specifies the aerosol production and measuring equipment used for testing high-efficiency filters and filter media in accordance with ISO 29463-3, ISO 29463-4 and ISO 29463-5, as well as the statistical basis for particle counting with a small number of counted events. It is inte ...
https://sales.sfs.fi/julkaisu.html.stx?id=712978

SFS-EN ISO 29463-4:2018:en – High-efficiency filters and filter media for removing particles in air. Part 4: Test method for determining leakage of filter elements-Scan method (ISO 29463-4:2011)

Verkkokaupan tuotteet
ISO 29463-4:2011 specifies the test procedure of the "scan method", considered to be the reference method, for determining the leakage of filter elements. It is applicable to filters ranging from classes ISO 35 H to ISO 75 U. ISO 29463-4:2011 also describes the other normative methods: the oil th ...
https://sales.sfs.fi/julkaisu.html.stx?id=712194

SFS-EN ISO 29463-3:2018:en – High-efficiency filters and filter media for removing particles in air. Part 3: Testing flat sheet filter media (ISO 29463-3:2011)

Verkkokaupan tuotteet
ISO 29463-3:2011 specifies the test procedure for testing the efficiency of flat sheet filter media. It is intended for use in conjunction with ISO 29463-1, ISO 29463-2, ISO 29463-4 and ISO 29463-5. The standards writing body responsible for this document in Finland is Mechanical Engineering an ...
https://sales.sfs.fi/julkaisu.html.stx?id=712197

SFS-ISO 29463-1:2017:en – High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking

Verkkokaupan tuotteet
This document establishes a classification of filters based on their performance, as determined in accordance with ISO 29463-3, ISO 29463-4 and ISO 29463-5. It also provides an overview of the test procedures, and specifies general requirements for assessing and marking the filters, as well as ...
https://sales.sfs.fi/julkaisu.html.stx?id=620222

SFS-EN ISO 29481-2:2016:en – Building information models. Information delivery manual. Part 2: Interaction framework (ISO 29481-2:2012)

Verkkokaupan tuotteet
ISO 29481-2:2012 specifies a methodology and format for describing ?coordination acts' between actors in a building construction project during all life cycle stages. It therefore specifies a methodology that describes an interaction framework, an appropriate way to map responsibilities and inte ...
https://sales.sfs.fi/julkaisu.html.stx?id=439054

SFS-EN ISO 29481-1:2017:en – Building information models. Information delivery manual. Part 1: Methodology and format (ISO 29481-1:2016)

Verkkokaupan tuotteet
ISO 29481-1:2016 specifies - a methodology that links the business processes undertaken during the construction of built facilities with the specification of information that is required by these processes, and - a way to map and describe the information processes across the life cycle of constru ...
https://sales.sfs.fi/julkaisu.html.stx?id=551301

SFS-EN ISO 294-5:2017:en – Plastics. Injection moulding of test specimens of thermoplastic materials. Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

Verkkokaupan tuotteet
ISO 294-5:2017 specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm and a minimum size of 80 mm × =90 mm and with a preferred thickness of 2 mm for single-point and multi-point data acquisition. It has been found to pro ...
https://sales.sfs.fi/julkaisu.html.stx?id=632602

SFS-EN ISO 294-1:2017:en – Muovit. Kestomuovisten koekappaleiden ruiskuvalu. Osa 1: Yleiset periaatteet sekä yleiskoekappaleiden ja koetankojen valu

Verkkokaupan tuotteet
ISO 294-1:2017 specifies the general principles to be followed when injection moulding test specimens of thermoplastic materials and gives details of mould designs for preparing two types of specimen for use in acquiring reference data, i.e. type A1 and type B1 test specimens as specified in ISO ...
https://sales.sfs.fi/julkaisu.html.stx?id=501480
Poutapilvi web design