Hakutulokset
Hakutulokset
Haulla "383" löytyi 161 tulosta.
https://sales.sfs.fi/julkaisu.html.stx?id=1040604
ISO/TR 3834-6:2007 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.
T ...
https://sales.sfs.fi/julkaisu.html.stx?id=34
ISO 13383-1:2012 describes manual methods of making measurements for the determination of grain size of fine ceramics (advanced ceramics, advanced technical ceramics) using photomicrographs of polished and etched test pieces. The methods described in ISO 13383-1:2012 do not yield the true mean gr ...
https://sales.sfs.fi/julkaisu.html.stx?id=410778
https://sales.sfs.fi/julkaisu.html.stx?id=1031538
ISO 6383-1:2015 specifies a method of determining the tear resistance of plastic film or sheet less than 1 mm thick, in the form of standard trouser-shaped test specimens, tested under defined conditions of pre-treatment, temperature, humidity, and speed of testing.
The method is applicable to fi ...
https://sales.sfs.fi/julkaisu.html.stx?id=400034
ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids.
The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road ta ...
https://sales.sfs.fi/julkaisu.html.stx?id=13582
ISO 13383-2:2012 specifies a manual method of making measurements for the determination of the volume fraction of major phases in fine ceramics (advanced ceramics, advanced technical ceramics) using micrographs of polished and etched sections, overlaying a square grid of lines, and counting the n ...
https://sales.sfs.fi/julkaisu.html.stx?id=410781
Applies to the following types of reactors: shunt reactors; series reactors including current-limiting reactors, neutral-earthing reactors, power flow control reactors, motor starting reactors, arc-furnace series reactors; filter (tuning) reactors; capacitor damping reactors; capacitor discharge ...
https://sales.sfs.fi/julkaisu.html.stx?id=13928
Soveltamisala
Tämä kansainvälinen standardi määrittelee menetelmän moottoribensiinin kokonaislyijypitoisuuden määrittämiseen, kun lyijyalkyylien pitoisuus litrassa on välillä 0,026...1,3 g.
Tätä kansainvälistä standardia ei voida käyttää moottoribensiinille, jossa on käytetty m ...
https://sales.sfs.fi/julkaisu.html.stx?id=13570
https://sales.sfs.fi/julkaisu.html.stx?id=952493
SFS-EN ISO 3834-5:2021:en – Quality requirements for fusion welding of metallic materials. Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
Verkkokaupan tuotteet
CEN ISO/TR 3834-6:en – Quality requirements for fusion welding of metallic materials. Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007)
Verkkokaupan tuotteet
SFS-EN ISO 13383-1:2016:en – Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Part 1: Determination of grain size and size distribution (ISO 13383-1:2012)
Verkkokaupan tuotteet
SFS-EN ISO 3834-1:2021:en – Quality requirements for fusion welding of metallic materials. Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
Verkkokaupan tuotteet
SFS-EN ISO 6383-1:en – Plastics. Film and sheeting. Determination of tear resistance. Part 1: Trouser tear method (ISO 6383-1:2015)
Verkkokaupan tuotteet
SFS-EN ISO 3838:en – Raakaöljy ja nestemäiset tai kiinteät öljytuotteet. Tiheyden tai suhteellisen tiheyden määrittäminen. Kapillaaritulppapyknometri- ja asteellinen kaksoiskapillaaripyknometrimenetelmä
Verkkokaupan tuotteet
SFS-EN ISO 13383-2:2016:en – Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Part 2: Determination of phase volume fraction by evaluation of micrographs (ISO 13383-2:2012)
Verkkokaupan tuotteet
SFS-EN ISO 6383-2:en – Plastics. Film and sheeting. Determination of tear resistance. Part 2: Elmendorf method (ISO 6383-2:1983)
Verkkokaupan tuotteet
SFS-EN ISO 3830:en – Öljytuotteet. Moottoribensiinin lyijypitoisuuden määrittäminen. Jodimonokloridimenetelmä
Verkkokaupan tuotteet
CEN ISO/TR 23383:2020:en – Textiles and textile products. Smart (Intelligent) textiles. Definitions, categorisation, applications and standardization needs (ISO/TR 23383:2020)
Verkkokaupan tuotteet