Hakutulokset
Hakutulokset
Haulla "403" löytyi 165 tulosta.
ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the characterization of substrates and coatings.
NOTE 1 For the determination of the surface free energy of polymers and coating ...
https://sales.sfs.fi/julkaisu.html.stx?id=860003
The aim of ISO 15403-1:2006 is to provide manufacturers, vehicle operators, fuelling station operators and others involved in the compressed-natural-gas vehicle industry with information on the fuel quality for natural gas vehicles (NGVs) required to develop and operate compressed-natural-gas veh ...
https://sales.sfs.fi/julkaisu.html.stx?id=108842
https://sales.sfs.fi/julkaisu.html.stx?id=969149
ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
The applicability can be restricted for liquids with non-Newtonian rheolog ...
https://sales.sfs.fi/julkaisu.html.stx?id=858883
ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicabilit ...
https://sales.sfs.fi/julkaisu.html.stx?id=858888
ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to 500 µg/l expressed as cyanide ions in the undiluted sample. The range of application can be cha ...
https://sales.sfs.fi/julkaisu.html.stx?id=198079
IEC 60811-403:2012 specifies the method for the ozone resistance test, which typically applies to cross-linked compounds. IEC 60811-403:2012 cancels and replaces Clause 8 of IEC 60811-2-1:1998, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There ...
https://sales.sfs.fi/julkaisu.html.stx?id=335295
https://sales.sfs.fi/julkaisu.html.stx?id=969145
https://sales.sfs.fi/julkaisu.html.stx?id=969163
ISO 5403-2:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated angular compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications. It uses a Maeser-type machine and includes a ...
https://sales.sfs.fi/julkaisu.html.stx?id=186938
SFS-EN ISO 19403-2:2020:en – Paints and varnishes. Wettability. Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
Verkkokaupan tuotteet
SFS-EN ISO 15403-1:en – Maakaasu. Maakaasu ajoneuvojen paineistettuna polttoaineena. Osa 1: Laatumerkinnät
Verkkokaupan tuotteet
SFS-EN ISO 4037-2:2021:en – Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV (ISO 4037-2:2019)
Verkkokaupan tuotteet
SFS-EN ISO 19403-5:2020:en – Paints and varnishes. Wettability. Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
Verkkokaupan tuotteet
SFS-EN ISO 19403-4:2020:en – Paints and varnishes. Wettability. Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
Verkkokaupan tuotteet
SFS-EN ISO 14403-1:en – Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA). Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
Verkkokaupan tuotteet
SFS-EN 60811-403:en – Electric and optical fibre cables – Test methods for non-metallic materials – Part 403: Miscellaneous tests – Ozone resistance test on cross-linked compounds
Verkkokaupan tuotteet
SFS-EN ISO 4037-3:2021:en – Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence (ISO 4037-3:2019)
Verkkokaupan tuotteet
SFS-EN ISO 4037-1:2021:en – Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Part 1: Radiation characteristics and production methods (ISO 4037-1:2019)
Verkkokaupan tuotteet
SFS-EN ISO 5403-2:en – Leather. Determination of water resistance of flexible leather. Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011)
Verkkokaupan tuotteet