Hakutulokset
Hakutulokset
Haulla "547" löytyi 87 tulosta.
ISO 5470-1:2016 describes a method of assessing the abrasive wear resistance of coated fabrics using the Taber abrader.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=453122
ISO 15547-2:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries.
The standards writ ...
https://sales.sfs.fi/julkaisu.html.stx?id=12730
ISO 15547-1:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, s ...
https://sales.sfs.fi/julkaisu.html.stx?id=12729
ISO 10547:2009 specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyester and gives rules for their designation.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=146539
Tässä standardissa esitetään standardien EN 547-1 ja EN 547-2 edellyttämät nykyiset ihmisen mitat (antropometriset tiedot) koneiden kulku- ja työskentelyaukkojen mittojen laskemiseksi.
Standardissa esitettävät antropometriset tiedot perustuvat alastomien paikallaan olevien ihmisten mitto ...
https://sales.sfs.fi/julkaisu.html.stx?id=194503
Tässä standardissa esitetään standardien EN 547-1 ja EN 547-2 edellyttämät nykyiset ihmisen mitat (antropometriset tiedot) koneiden kulku- ja työskentelyaukkojen mittojen laskemiseksi.
Standardissa esitettävät antropometriset tiedot perustuvat alastomien paikallaan olevien ihmisten mitto ...
https://sales.sfs.fi/julkaisu.html.stx?id=115928
This International Standard specifies design conditions and methods of calculation for air-conditioning and ventilation of accommodation spaces and the radio cabin on board seagoing merchant ships for all conditions except those encountered in extremely cold or hot climates (i.e. with lower or hi ...
https://sales.sfs.fi/julkaisu.html.stx?id=14159
https://sales.sfs.fi/julkaisu.html.stx?id=117098
Specifies requirements to prevent an outboard motor from being started in gear, when installed on small craft of up to 24 m length of hull.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=708396
https://sales.sfs.fi/julkaisu.html.stx?id=1028390
SFS-EN ISO 5470-1:2016:en – Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 1: Taber abrader (ISO 5470-1:2016)
Verkkokaupan tuotteet
SFS-EN ISO 15547-2:en – Öljy-, petrokemiallinen- ja maakaasuteollisuus. Levylämmönsiirtimet. Osa 2: Juotetut alumiiniset levylämmönsiirtimet
Verkkokaupan tuotteet
SFS-EN ISO 15547-1:en – Öljy-, petrokemiallinen- ja maakaasuteollisuus. Levylämmönsiirtimet. Osa 1: Levy- ja kehyslämmönsiirtimet
Verkkokaupan tuotteet
SFS-EN ISO 10547:en – Kuituköydet polyesteristä. Kerrospunos
Verkkokaupan tuotteet
SFS-EN 547-3 + A1:en – Koneturvallisuus. Ihmisen mitat. Osa 3: Antropometriset tiedot
Verkkokaupan tuotteet
SFS-EN 547-3 + A1 – Koneturvallisuus. Ihmisen mitat. Osa 3: Antropometriset tiedot
Verkkokaupan tuotteet
SFS-EN ISO 7547:en – Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations (ISO 7547:2002)
Verkkokaupan tuotteet
SFS-EN ISO 7547/AC:en – Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations (ISO 7547:2002/Cor 1:2008)
Verkkokaupan tuotteet
SFS-EN ISO 11547:2018:en – Small craft. Start-in-gear protection (ISO 11547:1994)
Verkkokaupan tuotteet
SFS-EN ISO 5470-2:2021:en – Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 2: Martindale abrader (ISO 5470-2:2021)
Verkkokaupan tuotteet