Siirry sisältöön

Hakutulokset

Hakutulokset

Haulla "604" löytyi 709 tulosta.

SFS-EN ISO 25178-604:en – Geometrical product specifications (GPS). Surface texture: Areal. Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)

Verkkokaupan tuotteet
ISO 25178-604:2013 specifies the metrological characteristics of coherence scanning interferometry (CSI) systems for 3D mapping of surface height. The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=236631

SFS-EN 60444-8:2017:en – Measurement of quartz crystal unit parameters – Part 8 : Test fixture for surface mounted quartz crystal units

Verkkokaupan tuotteet
IEC 60444-8:2016(E) describes test fixtures suitable for leadless surface mounted quartz crystal units in enclosures as defined in IEC 61837 (all parts). These fixtures allow the measurement of (series) resonance frequency, (series) resonance resistance, and equivalent electrical circui ...
https://sales.sfs.fi/julkaisu.html.stx?id=486484

SFS-EN 60811-604:en – Electric and optical fibre cables – Test methods for non-metallic materials – Part 604: Physical tests – Measurement of absence of corrosive components in filling compounds

Verkkokaupan tuotteet
IEC 60811-604:2012 indicates the effect of the filling compound when in contact with the metallic parts of the cable. IEC 60811-604:2012 cancels and replaces Clause 8 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are ...
https://sales.sfs.fi/julkaisu.html.stx?id=335401

SFS-EN ISO 14604:en – Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain (ISO 14604:2012)

Verkkokaupan tuotteet
ISO 14604:2012 describes a method of measuring the fracture strain of ceramic coatings by means of uniaxial tension or compression tests coupled with acoustic emission to monitor the onset of cracking of the coating. Tensile or compressive strains can also be applied by flexure using four-point b ...
https://sales.sfs.fi/julkaisu.html.stx?id=409137