Hakutulokset
Hakutulokset
Haulla "795" löytyi 201 tulosta.
ISO 20795-1:2013 classifies denture base polymers and copolymers and specifies their requirements. It also specifies the test methods to be used in determining compliance with these requirements. It further specifies requirements with respect to packaging and marking the products and to the instr ...
https://sales.sfs.fi/julkaisu.html.stx?id=231315
ISO 20795-2:2013 is applicable to orthodontic base polymers and copolymers used in the construction of both active and passive orthodontic appliances and specifies their requirements. It also specifies test methods to be used in determining compliance with these requirements. It further specifies ...
https://sales.sfs.fi/julkaisu.html.stx?id=231313
This standard specifies a method for the determination of the migration of constituents from the internal surface of plastic pipes, fittings and joints. Organoleptic and microbiological assessments are not included. This standard is applicable to all plastics pipes, fittings and joints to be used ...
https://sales.sfs.fi/julkaisu.html.stx?id=14430
This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characterist ...
https://sales.sfs.fi/julkaisu.html.stx?id=758684
Tässä asiakirjassa määritellään tiedot, jotka pitää antaa käyttäjille ja ulkopuolisille tarkastajille valmistus- ja huoltovaatimuksista tavallisten lääkinnällisten laitteiden merkintöjen lisäksi (ks. standardit EN 1041 ja EN ISO 15223-1). Tässä asiakirjassa annetaan tietoa, jo ...
https://sales.sfs.fi/julkaisu.html.stx?id=875059
Tämä julkaisu on saatavissa ETSI:stä. www.etsi.org
https://sales.sfs.fi/julkaisu.html.stx?id=100139912
https://sales.sfs.fi/julkaisu.html.stx?id=100019785
https://sales.sfs.fi/julkaisu.html.stx?id=100018890
This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of component ...
https://sales.sfs.fi/julkaisu.html.stx?id=194497
Tässä eurooppalaisessa standardissa määritellään rakenteesta irrotettavissa olevien yhdelle käyttäjälle tarkoitettujen kiinnityslaitteiden suojauskykyä koskevat vaatimukset ja niihin liittyvät testimenetelmät. Nämä kiinnityslaitteet sisältävät liikkumattomia tai liikkuvia (mobiil ...
https://sales.sfs.fi/julkaisu.html.stx?id=311305
SFS-EN ISO 20795-1:en – Hammaslääketiede. Peruspolymeerit. Osa 1: Hampaiston peruspolymeerit
Verkkokaupan tuotteet
SFS-EN ISO 20795-2:en – Hammaslääketiede. Pohjalevypolymeerit. Osa 2: Oikomakojeissa käytettävät polymeerit
Verkkokaupan tuotteet
SFS-EN ISO 8795:en – Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001)
Verkkokaupan tuotteet
SFS-EN 13795-1:2019:en – Leikkausasut ja -liinat. Vaatimukset ja testausmenetelmät. Osa 1: Leikkaustakit ja -liinat
Verkkokaupan tuotteet
SFS-EN 13795-1:2019 – Leikkausasut ja -liinat. Vaatimukset ja testausmenetelmät. Osa 1: Leikkaustakit ja -liinat
Verkkokaupan tuotteet
SFS-ETS 300795 – V interfaces at the local Exchange (LE). Access Network (AN) supporting V5. Transmission characteristics performance design objectives for call handling and bearer channel connection management
Verkkokaupan tuotteet
SFS-ENV 12795 – Maantiekuljetusten ja liikenteen telematiikka (RTTT). Lyhyen matkan tiedonsiirto (DSRC). DSRC-siirtokerros: Keskipitkän matkan haku ja looginen yhteyskäytäntö
Verkkokaupan tuotteet
SFS-EN ISO/IEC 7487-1 – Information technology. Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides. ISO type 202. Part 1: Dimensional, physical and magnetic characteristics (ISO/IEC 7487-1:1993)
Verkkokaupan tuotteet
SFS-EN 795:en – Putoamissuojaimet. Kiinnityslaitteet
Verkkokaupan tuotteet
SFS-EN 795 – Putoamissuojaimet. Kiinnityslaitteet
Verkkokaupan tuotteet