Hakutulokset
Hakutulokset
Haulla "886" löytyi 123 tulosta.
This document specifies the properties and performance of sterile single-use hypodermic syringes with an auto-disable syringe feature intended to deliver a fixed dose of vaccine immediately after filling. The syringes can be made of plastic, rubber or other materials and can be with or without ne ...
https://sales.sfs.fi/julkaisu.html.stx?id=892730
ISO 9886:2004 describes methods for measuring and interpreting the following physiological parameters: body core temperature; skin temperatures; heart rate; body-mass loss.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry Standard ...
https://sales.sfs.fi/julkaisu.html.stx?id=14665
This document specifies requirements for sterile single-use hypodermic syringes made of plastic and rubber materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design such that the syringe can be rendered unusa ...
https://sales.sfs.fi/julkaisu.html.stx?id=750662
ISO 7886-1:2017 specifies requirements and test methods for verifying the design of empty sterile single-use hypodermic syringes, with or without needle, made of plastic or other materials and intended for the aspiration and injection of fluids after filling by the end-users. This document does n ...
https://sales.sfs.fi/julkaisu.html.stx?id=660440
ISO 6886:2016 specifies a method for the determination of the oxidative stability of fats and oils under extreme conditions that induce rapid oxidation: high temperature and high air flow. It does not allow determination of the stability of fats and oils at ambient temperatures, but it does allow ...
https://sales.sfs.fi/julkaisu.html.stx?id=406288
This document specifies requirements for sterile single-use hypodermic syringes of nominal capacity 1 ml and above, made of plastic materials and intended for use with power-driven syringe pumps.
This document does not apply to syringes with auto-disable syringe features (ISO 7886-3[2]), syringes ...
https://sales.sfs.fi/julkaisu.html.stx?id=890502
This lntemational Standard specifies design requirements and suitable calculation methods for the ventilation of the engine room in diesel-engined ships, for normal conditions in all waters.
Annex A provides guidance and good practice in the design of ventilation systems for ships' engine rooms.
...
https://sales.sfs.fi/julkaisu.html.stx?id=14436
https://sales.sfs.fi/julkaisu.html.stx?id=100018592
This document is applicable to polyaluminium hydroxide silicate sulfate used for treatment of water intended for human consumption. It describes the characteristics of polyaluminium hydroxide silicate sulfate and specifies the requirements for polyaluminium hydroxide silicate sulfate and refers t ...
https://sales.sfs.fi/julkaisu.html.stx?id=11207
This standard specifies the requirements relating to:
Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al)
Filler metal for welding
for aerospace applications.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=919250
SFS-EN ISO 7886-3:2020:en – Sterile hypodermic syringes for single use. Part 3: Auto-disabled syringes for fixed-dose immunization (ISO 7886-3:2020)
Verkkokaupan tuotteet
SFS-EN ISO 9886:en – Ergonomia. Lämpökuormittumisen arviointi käyttäen fysiologisia mittauksia
Verkkokaupan tuotteet
SFS-EN ISO 7886-4:2019:en – Steriilit kertakäyttöiset injektioruiskut. Osa 4: Ruiskut joiden uudelleenkäyttö on estetty
Verkkokaupan tuotteet
SFS-EN ISO 7886-1:2018:en – Steriilit kertakäyttöiset injektioruiskut. Osa 1: Manuaalisesti käytettävät ruiskut
Verkkokaupan tuotteet
SFS-EN ISO 6886:en – Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test) (ISO 6886:2016)
Verkkokaupan tuotteet
SFS-EN ISO 7886-2:2020:en – Sterile hypodermic syringes for single use. Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
Verkkokaupan tuotteet
SFS-EN ISO 8861:en – Laivanrakennus. Diesel-moottoreilla varustettujen laivojen konehuoneen ilmastointi. Suunnittelu- ja laskentaperusteet
Verkkokaupan tuotteet
SFS-EN ISO 1886 – Reinforcement fibres. Sampling plans applicable to received batches (ISO 1886:1990)
Verkkokaupan tuotteet
SFS-EN 886:en – Talousveden käsittelyyn tarkoitetut kemikaalit. Polyalumiinihydroksidisilikaattisulfaatti
Verkkokaupan tuotteet
SFS-EN 3886 – Aerospace series. Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al). Filler metal for welding
Verkkokaupan tuotteet