Hakutulokset
Hakutulokset
Haulla "965" löytyi 114 tulosta.
1.1 This International Standard specifies a method for the determination of the comparative impact value of adhesive bonds in shear, when tested on standard specimens, and using specified conditions of preparation, conditioning and testing.
1.2 The method is intended to be used for wood-to-wood o ...
https://sales.sfs.fi/julkaisu.html.stx?id=14631
Specifies a method of vertical impact testing, the testing procedure and how the results of tests should be presented. It may be performed either as a single test to investigate the effects of vertical impact or as a part of a sequence of tests designed to measure the ability of a sack to withsta ...
https://sales.sfs.fi/julkaisu.html.stx?id=14230
Principle: The filled sack is raised above a rigid plane surface and released to strike this surface after free fall, the atmospheric conditions, the height of drop and the position of the package being set in advance. Various kinds of dropping are described. Test methods with progressive and con ...
https://sales.sfs.fi/julkaisu.html.stx?id=246625
This part of ISO 965 specifies a tolerance system for ISO general purpose metric screw threads (M) according to ISO 261. The tolerance system refers to the basic profile according to ISO 68-1.
The standards writing body responsible for this document in Finland is Mechanical Engineering and M ...
https://sales.sfs.fi/julkaisu.html.stx?id=845111
IEC 60965:2016 establishes requirements for the Supplementary Control Room provided to enable the operating staff of nuclear power plants to shut down the reactor, where previously operating, and maintain the plant in a safe shut-down state in the event that control of the safety functions can no ...
https://sales.sfs.fi/julkaisu.html.stx?id=431286
This document specifies the requirements relating to:
Steel FE-PM1802 (X5CrNiCu15-5)
Consumable electrode remelted
Solution treated and precipitation treated
Forgings
a or D = 200 mm
Rm = 965 MPa
The standards writing body responsible for this document in Finland is Finnish Standards Associat ...
https://sales.sfs.fi/julkaisu.html.stx?id=927229
This standard specifies the requirements relating to:
Steel FE-PM1802 (X5CrNiCu15-5)
Consumable electrode remelted
Solution treated and precipitation treated
Bar for machining
a or D = 200 mm
Rm = 965 MPa
for aerospace applications.
The standards writing body responsible for this document in ...
https://sales.sfs.fi/julkaisu.html.stx?id=929265
This European Standard, EN 13965-2, Characterization of waste - Terminology - Part 2: Management related terms and defintions, gives a compilation of selected and updated terms and definitions, for use by for example producers, waste industry and legislators in the waste management field. It is h ...
https://sales.sfs.fi/julkaisu.html.stx?id=159447
Tämä julkaisu on saatavissa ETSI:stä. www.etsi.org
https://sales.sfs.fi/julkaisu.html.stx?id=100138604
https://sales.sfs.fi/julkaisu.html.stx?id=100019723
SFS-EN ISO 9653:en – Adhesives. Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
Verkkokaupan tuotteet
SFS-EN ISO 7965-2:en – Sacks. Drop test. Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993)
Verkkokaupan tuotteet
SFS-EN 27965-1:en – Packaging. Sacks. Drop test. Part 1: Paper sacks (ISO 7965-1:1984)
Verkkokaupan tuotteet
SFS-ISO 965-1:2019:en – ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
Verkkokaupan tuotteet
SFS-EN 60965:2016:en – Nuclear power plants – Control rooms – Supplementary control room for reactor shutdown without access to the main control room
Verkkokaupan tuotteet
SFS-EN 2816:2019 – Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D = 200 mm. Rm = 965 MPa
Verkkokaupan tuotteet
SFS-EN 2815 – Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D = 200 mm. Rm = 965 MPa
Verkkokaupan tuotteet
SFS-EN 13965-2:en – Jätteiden karakterisointi. Terminologia. Osa 2: Yleisiä termejä ja määritelmiä
Verkkokaupan tuotteet
SFS-ETS 300965 – Digital cellular telecommunications system. Voice Activity Detection (VAD) (GSM 06.32 version 5.0.1)
Verkkokaupan tuotteet
SFS-ENV 1965-2 – Structural adhesives. Corrosion. Part 2: Determination and classification of corrosion to a brass substrate
Verkkokaupan tuotteet