Hakutulokset
Hakutulokset
Haulla "259" löytyi 253 tulosta.
ISO 4259-2:2017 specifies the methodology for the application of precision estimates of a test method derived from ISO 4259-1. In particular, it defines the procedures for setting the property specification limits based upon test method precision where the property is determined using a specific ...
https://sales.sfs.fi/julkaisu.html.stx?id=630504
ISO 4259-1:2017 specifies the methodology for the design of an Interlaboratory Study (ILS) and calculation of precision estimates of a test method specified by the study. In particular, it defines the relevant statistical terms (Clause 3), the procedures to be adopted in the planning of ILS to de ...
https://sales.sfs.fi/julkaisu.html.stx?id=630462
The ISO 6259 series specifies a method of determining the tensile properties of thermoplastics pipes, including the following properties: stress at yield, and elongation at break.
ISO 6259-1:2015 is applicable to all types of thermoplastics pipe, regardless of their intended use.
The standards ...
https://sales.sfs.fi/julkaisu.html.stx?id=377668
This Part of EN 12259 specifies requirements for construction and performance of water motor alarms for use in conjunction with alarm valves conforming to EN 12259-2, EN 12259-3 and EN 12259-9 used in automatic sprinkler systems complying with EN 12845 and water spray systems conforming to the re ...
https://sales.sfs.fi/julkaisu.html.stx?id=4392
ISO 6259-3:2015 specifies a method of determining the tensile properties of polyolefin (polyethylene, cross-linked polyethylene, polypropylene, and polybutene) pipes, and the following properties: the stress at yield and the elongation at break.
The standards writing body responsible for this d ...
https://sales.sfs.fi/julkaisu.html.stx?id=384670
ISO 2592:2017 specifies a procedure for the determination of flash and fire points of petroleum products using the Cleveland open cup apparatus. It is applicable to petroleum products having open cup flash points between 79 °C and 400 °C, except fuel oils which are most commonly tested by the c ...
https://sales.sfs.fi/julkaisu.html.stx?id=547401
This European Standard specifies requirements for construction and performance of water motor alarm for use in conjunction with alarm valves conforming to EN 12259-2:1997, EN 12259-3:199x and EN 12259-9:199x used in automatic sprinkler systems complying with EN 12845:1997 and water spray systems ...
https://sales.sfs.fi/julkaisu.html.stx?id=4391
This document specifies a method for determining the tensile properties of pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI, PVC-M or PVC-A), and in ...
https://sales.sfs.fi/julkaisu.html.stx?id=932123
This document specifies the methodology for the regular monitoring of the test method precision achieved versus the precision published in the standard test method using data from proficiency testing schemes (PTSs) supported by the regular users of standard test methods.
The procedures in this do ...
https://sales.sfs.fi/julkaisu.html.stx?id=856842
https://sales.sfs.fi/julkaisu.html.stx?id=825831
SFS-EN ISO 4259-2:2017:en – Petroleum and related products. Precision of measurement methods and results. Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)
Verkkokaupan tuotteet
SFS-EN ISO 4259-1:2017:en – Petroleum and related products. Precision of measurement methods and results. Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)
Verkkokaupan tuotteet
SFS-EN ISO 6259-1:en – Thermoplastics pipes. Determination of tensile properties. Part 1: General test method (ISO 6259-1:2015)
Verkkokaupan tuotteet
SFS-EN 12259-4:en – Kiinteät palonsammutusjärjestelmät. Sprinkleri- ja vesivalelulaitteistojen komponentit. Osa 4: Vesimoottorihälytyslaitteet
Verkkokaupan tuotteet
SFS-EN ISO 6259-3:en – Thermoplastics pipes. Determination of tensile properties. Part 3: Polyolefin pipes (ISO 6259-3:2015)
Verkkokaupan tuotteet
SFS-EN ISO 2592:2017:en – Petroleum and related products. Determination of flash and fire points. Cleveland open cup method (ISO 2592:2017)
Verkkokaupan tuotteet
SFS-EN 12259-4/A1:en – Kiinteät palonsammutusjärjestelmät. Sprinkleri- ja vesivalelulaitteistojen komponentit. Osa 4: Vesimoottorihälytyslaitteet
Verkkokaupan tuotteet
SFS-EN ISO 6259-2:2020:en – Thermoplastics pipes. Determination of tensile properties. Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO 6259-2:2020)
Verkkokaupan tuotteet
SFS-EN ISO 4259-3:2020:en – Petroleum and related products. Precision of measurement methods and results. Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
Verkkokaupan tuotteet
SFS-EN ISO 4259-2:2017/A1:2019:en – Petroleum and related products. Precision of measurement methods and results. Part 2: Interpretation and application of precision data in relation to methods of test. Amendment 1 (ISO 4259-2:2017/Amd 1:2019)
Verkkokaupan tuotteet