Hakutulokset
Hakutulokset
Haulla "710" löytyi 122 tulosta.
ISO 13710:2004 specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types.
ISO 13710:2004 is not applicable to controlled-volume pumps and rot ...
https://sales.sfs.fi/julkaisu.html.stx?id=12268
This European Standard specifies the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-03, EN 4710-04, EN 4710 ...
https://sales.sfs.fi/julkaisu.html.stx?id=889271
ISO 6710:2017 specifies requirements and test methods for evacuated and non-evacuated single-use venous blood specimen containers.
It does not specify requirements for blood collection needles, needle holders, blood culture receptacles or "arterial" blood gas collection devices that can be used f ...
https://sales.sfs.fi/julkaisu.html.stx?id=542775
ISO 10710:2010 specifies a method for the determination of the inhibition of growth of the macroalga Ceramium tenuicorne by substances and mixtures contained in seawater or by waste water with salinities between 4S and 32S. This method is applicable to substances that are easily soluble in water. ...
https://sales.sfs.fi/julkaisu.html.stx?id=228536
This International Standard describes a test procedure for assessing the protection offered by coatings of paints or varnishes on aluminium and aluminium alloys against corrosion arising from a scribe mark cut through the coating, when the coated panel is subjected to a test regime of alternate i ...
https://sales.sfs.fi/julkaisu.html.stx?id=12790
This European Standard specifies the dimensions, mass, tolerances and static values of catch spring for use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-0 ...
https://sales.sfs.fi/julkaisu.html.stx?id=889289
This European Standard specifies the dimensions, mass, tolerances and static values of catch spring for use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-0 ...
https://sales.sfs.fi/julkaisu.html.stx?id=889381
This European standard specifies the dimensions, mass, tolerances and static values of spring clamps for use in fuselage interior equipment and non-structural or secondary structural area. This standard part shall be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-02.
T ...
https://sales.sfs.fi/julkaisu.html.stx?id=887014
Applies to electrical installations in medical locations so as to ensure safety of patients and medical staff. These requirements, in the main, refer to hospitals, private clinics, medical and dental practices, health care centres and dedicated medical rooms in the work place.
The standards wri ...
https://sales.sfs.fi/julkaisu.html.stx?id=375912
The standards writing body responsible for this document in Finland is Electrotechnical Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=377272
SFS-EN ISO 13710:en – Öljy- ja maakaasuteollisuudessa käytettävät pakkosyöttöiset mäntäpumput. Tekniset spesifikaatiot
Verkkokaupan tuotteet
SFS-EN 4710-06 – Aerospace series. Quick release fastening systems for non-structural applications. Part 06: Stud. quick-release and locking
Verkkokaupan tuotteet
SFS-EN ISO 6710:2017:en – Kertakäyttöiset verinäytteen keräysastiat
Verkkokaupan tuotteet
SFS-EN ISO 10710:en – Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne (ISO 10710:2010)
Verkkokaupan tuotteet
SFS-EN ISO 15710:en – Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)
Verkkokaupan tuotteet
SFS-EN 4710-05 – Aerospace series. Quick release fastening systems for non-structural applications. Part 05: Spring clamp. Two ways tolerance compensation
Verkkokaupan tuotteet
SFS-EN 4710-04 – Aerospace series. Quick release fastening systems for non-structural applications. Part 04: Spring clamp. One way tolerance compensation
Verkkokaupan tuotteet
SFS-EN 4710-03:2018 – Aerospace series. Quick release fastening systems for non-structural applications. Part 03: Spring clamp
Verkkokaupan tuotteet
HD 60364-7-710:en – Low-voltage electrical installations – Part 7-710: Requirements for special installations or locations – Medical locations
Verkkokaupan tuotteet
HD 60364-7-710/AC:en – Low-voltage electrical installations – Part 7-710: Requirements for special installations or locations – Medical locations
Verkkokaupan tuotteet