Hakutulokset
Hakutulokset
Haulla "1008" löytyi 81 tulosta.
ISO 10081-4:2014 specifies the classification and designation of dense shaped refractory products of special composition including oxide products, oxide and non-oxide products, non-oxide silicon carbide or carbon-based products, and further special products which are only designated but not class ...
https://sales.sfs.fi/julkaisu.html.stx?id=299394
ISO 10081-3:2003 specifies the classification and designation of dense shaped basic refractory products containing 7 % or more but less than 50 % residual carbon after coking. It is applicable to products with or without antioxidant additives, with or without metal plates and reinforcement.
The ...
https://sales.sfs.fi/julkaisu.html.stx?id=11420
ISO 10081-2:2003 specifies the classification and designation of dense shaped basic refractory products with or without antioxidant additives. Products containing 7 % or more residual carbon after coking are excluded from this classification. The classification is applicable to dense shaped produ ...
https://sales.sfs.fi/julkaisu.html.stx?id=11419
ISO 10081-1:2003 specifies the classification and designation of dense shaped refractory products of the alumina-silica series, with the following exceptions: products containing more than 5 % of any metallic oxide other than alumina, silica, iron oxide; and products containing more than 1 % carb ...
https://sales.sfs.fi/julkaisu.html.stx?id=11418
This International Standard gives an overview of the different types of phenolic resin used in the manufacture of thermosetting plastics and a summary of available test methods.
Clause 3 defines terms relating to the chemical structure of phenolic resins, their physical state and their degree of ...
https://sales.sfs.fi/julkaisu.html.stx?id=11421
https://sales.sfs.fi/julkaisu.html.stx?id=100019201
IEC 61008-1:2010 applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating overcurrent protection (hereafter referred to as RCCBs), for rated voltages not exceeding 440 V a.c. wi ...
https://sales.sfs.fi/julkaisu.html.stx?id=337212
1.1 The scope of this part of EN 10088 is to specify the technical delivery conditions for hot or cold formed bars, rods, wire, sections and bright products of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delive ...
https://sales.sfs.fi/julkaisu.html.stx?id=123288
1.1 Standardin EN 10088 tässä osassa määritellään standardissa EN 10021 esitettyjen yleisten teknisten toimitusehtojen lisäksi sovellettavat tekniset toimitusehdot rakennuskäyttöön tarkoitetuille kuuma- ja kylmävalssatuille tangoille, valssilangoille, langoille, profiileille ja kirkka ...
https://sales.sfs.fi/julkaisu.html.stx?id=161242
1.1 The scope of this part of EN 10088 is to specify the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified i ...
https://sales.sfs.fi/julkaisu.html.stx?id=123287
SFS-EN ISO 10081-4:en – Classification of dense shaped refractory products. Part 4: Special products (ISO 10081-4:2014)
Verkkokaupan tuotteet
SFS-EN ISO 10081-3:en – Classification of dense shaped refractory products. Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)
Verkkokaupan tuotteet
SFS-EN ISO 10081-2:en – Classification of dense shaped refractory products. Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)
Verkkokaupan tuotteet
SFS-EN ISO 10081-1:en – Classification of dense shaped refractory products. Part 1: Alumina-silica (ISO 10081-1:2003)
Verkkokaupan tuotteet
SFS-EN ISO 10082:en – Plastics. Phenolic resins. Classification and test methods (ISO 10082:1999)
Verkkokaupan tuotteet
SFS-EN ISO 10082 – Plastics. Phenolic resins. Definitions and test methods (ISO 10082:1991)
Verkkokaupan tuotteet
SFS-EN 61008-1:en – Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) – Part 1: General rules
Verkkokaupan tuotteet
SFS-EN 10088-5:en – Ruostumattomat teräkset. Osa 5: Rakennuskäyttöön tarkoitetut korroosionkestävät tangot, valssilangat, langat, profiilit ja kirkkaat tuotteet. Tekniset toimitusehdot
Verkkokaupan tuotteet
SFS-EN 10088-5 – Ruostumattomat teräkset. Osa 5: Rakennuskäyttöön tarkoitetut korroosionkestävät tangot, valssilangat, langat, profiilit ja kirkkaat tuotteet. Tekniset toimitusehdot
Verkkokaupan tuotteet
SFS-EN 10088-4:en – Ruostumatomat teräkset. Osa 4: Rakennuskäyttöön tarkoitetut korroosionkestävät levyt ja nauhat. Tekniset toimitusehdot
Verkkokaupan tuotteet