Hakutulokset
Hakutulokset
Haulla "1064" löytyi 19 tulosta.
ISO 11064-7:2006 establishes ergonomic principles for the evaluation of control centres. It gives requirements, recommendations and guidelines on evaluation of the different elements of the control centre, i.e. control suite, control room, workstations, displays and controls, and work environment ...
https://sales.sfs.fi/julkaisu.html.stx?id=11754
This Part of ISO 11064 specifies requirements and establishes general principles for the ergonomic design of a new control centre, as well as for control centre expansion, refurbishment, and technology based upgrades. This part of ISO 11064 covers all types of control centres, for example, those ...
https://sales.sfs.fi/julkaisu.html.stx?id=11749
ISO 11064-6:2005 gives environmental requirements as well as recommendations for the ergonomic design, upgrading or refurbishment of control rooms and other functional areas within the control suite. The following aspects are covered: thermal environment (temperate regions); air quality; lighting ...
https://sales.sfs.fi/julkaisu.html.stx?id=11753
ISO 11064-5:2008 presents principles and gives requirements and recommendations for displays, controls, and their interaction, in the design of control-centre hardware and software.
The standards writing body responsible for this document in Finland is Mechanical Engineering and Metals Industry ...
https://sales.sfs.fi/julkaisu.html.stx?id=117083
ISO 11064-4:2013 specifies ergonomic principles, recommendations and requirements for the design of workstations found in control centres. It covers control workstation design with particular emphasis on layout and dimensions. It is applicable primarily to seated, visual-display-based workstation ...
https://sales.sfs.fi/julkaisu.html.stx?id=242307
ISO 10644:2009 specifies the requirements for metric screw and plain washer assemblies made of steel with coarse thread M2 to M12 inclusive, flat seating heads, property classes up to and including 10.9 and washer hardness classes 200 HV or 300 HV. The plain washers are captive, i.e. prevented fr ...
https://sales.sfs.fi/julkaisu.html.stx?id=130660
This part of ISO 11073 specifies the common conventions required for the cart-to-host as well as cart-to-cart interchange of specific patient data (demographic, recording, ...), ECG signal data, ECG measurement and ECG interpretation results. This part of ISO 11073 specifies the content and struc ...
https://sales.sfs.fi/julkaisu.html.stx?id=144969
IEC 62115:2003+A1:2004+A2:2010 Deals with the safety of toys that have at least one function dependent on electricity. Examples of toys within the scope of this standard are:
- constructional sets;
- experimental sets; functional toys (having a function similar to an appliance or installation u ...
https://sales.sfs.fi/julkaisu.html.stx?id=11751
IEC 61803:1999+A1:2010 applies to all line-commutated high-voltage direct current (HVDC) converter stations used for power exchange in utility systems. This standard presumes the use of 12-pulse thyristor converters but can, with due care, also be used for 6-pulse thyristor converters. In some ap ...
https://sales.sfs.fi/julkaisu.html.stx?id=11750
This document specifies the characteristics of hexagon socket countersunk head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M20, and with product grade A.
NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 a ...
https://sales.sfs.fi/julkaisu.html.stx?id=825439
SFS-EN ISO 11064-7:en – Ergonomic design of control centres. Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006)
Verkkokaupan tuotteet
SFS-EN ISO 11064-1:en – Valvontakeskusten ergonominen suunnittelu. Osa 1: Valvontakeskusten suunnitteluperiaatteet
Verkkokaupan tuotteet
SFS-EN ISO 11064-6:en – Ergonomic design of control centres. Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
Verkkokaupan tuotteet
SFS-EN ISO 11064-5:en – Valvontakeskusten ergonominen suunnittelu. Osa 5: Näytöt ja ohjaimet
Verkkokaupan tuotteet
SFS-EN ISO 11064-4:en – Valvontakeskusten ergonominen suunnittelu. Osa 4: Työpisteiden tilasuunnittelu ja mitat
Verkkokaupan tuotteet
SFS-EN ISO 10644:en – Teräksiset ruuvi-aluslaattayhdistelmät pyöreillä aluslaatoilla. Aluslaatan kovuusluokat 200 HV ja 300 HV
Verkkokaupan tuotteet
SFS-ISO 11073-91064:en – Health informatics — Standard communication protocol — Part 91064: Computer-assisted electrocardiography
Verkkokaupan tuotteet
SFS-EN ISO 11064-3 + AC:en – Valvontakeskusten ergonominen suunnittelu. Osa 3: Valvomotilan tilasuunnittelu
Verkkokaupan tuotteet
SFS-EN ISO 11064-2:en – Valvontakeskusten ergonominen suunnittelu. Osa 2: Valvomon tilajärjestelyn periaatteet
Verkkokaupan tuotteet
SFS-EN ISO 10642:2019:en – Fasteners. Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
Verkkokaupan tuotteet