Hakutulokset
Hakutulokset
Haulla "321" löytyi 146 tulosta.
This standard specifies the characteristics of tools designed to extract inserts from rectangular connectors conforming to EN 3218-005 to EN 3218-008.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=916579
This standard specifies the characteristics of protective covers for rectangular connectors conforming to EN 3218-006 and EN 3218-008.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=917038
This standard specifies the characteristics of protective covers for rectangular connectors conforming to EN 3218-005 and EN 3218-007 connectors.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=917039
IEC 62321-7-2:2017 describes procedures to measure hexavalent chromium, Cr(VI), quantitatively in samples of polymers and electronics. This method employs organic solvent to dissolve or swell the sample matrix, followed by an alkaline digestion procedure to extract Cr(VI) from samples. Studies ha ...
https://sales.sfs.fi/julkaisu.html.stx?id=519274
ISO 10321:2008 specifies an index test method for determination of the tensile properties of joints and seams in geosynthetics, using a wide-width strip. The method is applicable to most geosynthetics. It is also applicable to geogrids, but the specimen dimensions may need to be altered. This tes ...
https://sales.sfs.fi/julkaisu.html.stx?id=112123
ISO 3218:2014 lays down the principles to be adopted for designating essential oils in English and French, e.g. for the labelling and/or the marking.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=296133
ISO 3210:2017 specifies methods of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in acid solution(s).
It consists of the following two methods.
- Method 1: Assessment of quality of sealed anodic oxidation c ...
https://sales.sfs.fi/julkaisu.html.stx?id=630411
https://sales.sfs.fi/julkaisu.html.stx?id=999633
https://sales.sfs.fi/julkaisu.html.stx?id=999627
https://sales.sfs.fi/julkaisu.html.stx?id=1034177
SFS-EN 3218-011 – Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors. Product standard
Verkkokaupan tuotteet
SFS-EN 3218-010 – Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors. Product standard
Verkkokaupan tuotteet
SFS-EN 3218-009 – Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors. Product standard
Verkkokaupan tuotteet
SFS-EN 62321-7-2:2017:en – Determination of certain substances in electrotechnical products – Part 7-2: Hexavalent chromium – Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method
Verkkokaupan tuotteet
SFS-EN ISO 10321:en – Geosynthetics. Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
Verkkokaupan tuotteet
SFS-EN ISO 3218:en – Essential oils. Principles of nomenclature (ISO 3218:2014)
Verkkokaupan tuotteet
SFS-EN ISO 3210:2017:en – Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
Verkkokaupan tuotteet
SFS-EN ISO 3219-2:2021:en – Rheology. Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
Verkkokaupan tuotteet
SFS-EN ISO 3219-1:2021:en – Rheology. Part 1: Vocabulary and symbols for rotational and oscillatory rheometry (ISO 3219-1:2021)
Verkkokaupan tuotteet
SFS-EN ISO 16321-2:2021:en – Eye and face protection for occupational use. Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
Verkkokaupan tuotteet