Hakutulokset
Hakutulokset
Haulla "512" löytyi 210 tulosta.
The standards writing body responsible for this document in Finland is Electrotechnical Standardization in Finland.
https://sales.sfs.fi/julkaisu.html.stx?id=726159
IEC 60811-512:2012 describes the procedure for testing tensile strength and elongation at break after conditioning at elevated temperature. It is specific to polyethylene and polypropylene compounds. This test is intended for samples from filled cables, of polyolefin insulations with a wall thick ...
https://sales.sfs.fi/julkaisu.html.stx?id=335377
IEC 60512-1-100:2012 provides a listing of the 60512 series of standards for specific tests that are created for connectors. Further it gives cross-references with the former (60)512 standards, where different test numbers were used. The connector tests as such are mainly identical with the previ ...
https://sales.sfs.fi/julkaisu.html.stx?id=371706
ISO 10512:2012 specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for diamter sizes up to and including 16 mm and product gr ...
https://sales.sfs.fi/julkaisu.html.stx?id=223571
IEC 60512-9-4:2011 when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess ...
https://sales.sfs.fi/julkaisu.html.stx?id=335153
IEC 60512-9-3:2011 defines a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes a specified electrical load. This second edition cancels and replaces Test 9c of IEC 60512-5, is ...
https://sales.sfs.fi/julkaisu.html.stx?id=335147
IEC 60512-8-2:2011 when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determi ...
https://sales.sfs.fi/julkaisu.html.stx?id=335129
IEC 60512-17-2:2011 when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to assess the ...
https://sales.sfs.fi/julkaisu.html.stx?id=333971
ISO 17512-2:2011 specifies a rapid screening method for evaluating the habitat function of soils based on the avoidance behaviour of springtails.
The test is a rapid method that reflects the bioavailability of contaminants in natural soils and substances spiked into soils to Folsomia candida. In ...
https://sales.sfs.fi/julkaisu.html.stx?id=889403
ISO 17512-1:2008 specifies a rapid screening method for evaluating the habitat function of soils and the influence of contaminants and chemicals on earthworm behaviour.
The sublethal test is a rapid method that reflects the bioavailability of contaminant mixtures in natural soils and substances s ...
https://sales.sfs.fi/julkaisu.html.stx?id=889213
SFS-EN IEC 60512-1:2018:en – Connectors for electrical and electronic equipment – Tests and measurements – Part 1: Generic specification
Verkkokaupan tuotteet
SFS-EN 60811-512:en – Electric and optical fibre cables – Test methods for non-metallic materials – Part 512: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Tensile strength and elongation at break after conditioning at elevated temperature
Verkkokaupan tuotteet
SFS-EN 60512-1-100:en – Connectors for electronic equipment – Tests and measurements – Part 1-100: General – Applicable publications
Verkkokaupan tuotteet
SFS-EN ISO 10512:en – Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10 (ISO 10512:2012)
Verkkokaupan tuotteet
SFS-EN 60512-9-4:en – Connectors for electronic equipment – Tests and measurements – Part 9-4: Endurance tests – Test 9d: Durability of contact retention system and seals (maintenance, ageing)
Verkkokaupan tuotteet
SFS-EN 60512-9-3:en – Connectors for electronic equipment – Tests and measurements – Part 9-3: Endurance tests – Test 9c: Mechanical operation (engaging/separating) with electrical load
Verkkokaupan tuotteet
SFS-EN 60512-8-2:en – Connectors for electronic equipment – Tests and measurements – Part 8-2: Static load tests (fixed connectors) – Test 8b: Static load, axial
Verkkokaupan tuotteet
SFS-EN 60512-17-2:en – Connectors for electronic equipment – Tests and measurements – Part 17-2: Cable clamping tests – Test 17b: Cable clamp resistance to cable rotation
Verkkokaupan tuotteet
SFS-EN ISO 17512-2:2020:en – Soil quality. Avoidance test for determining the quality of soils and effects of chemicals on behaviour. Part 2: Test with collembolans (Folsomia candida) (ISO 17512-2:2011)
Verkkokaupan tuotteet
SFS-EN ISO 17512-1:2020:en – Soil quality. Avoidance test for determining the quality of soils and effects of chemicals on behaviour. Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) (ISO 17512-1:2008)
Verkkokaupan tuotteet